green_overcomer

Wow, thread starter. Sa totoo lang eh enjoy ako looking at the racing pics and hopefully maka-punta ako diyan to race. Busy lang talaga ako but I'm sure dadating din yung time na yun. Right now practice driving muna ako dito sa camp namin. Ayoko munang sumabay sa inyo kasi for sure mababangga ko ang ilang mga kotse diyan Aside from practicing my driving skills, my next project would be to start hopping up the kit. I'm planning to buy ball bearings and an aluminum shaft muna. Pag-iipunan ko na for next month's sweldo.

green_overcomer

Baka kasama sa hop ups. Hop ups ng weight. Joke

grizzle

iTrader: (1)

Pansit ni chowchie.

Sa mga hindi nakasama sa libre, next Friday, tingnan natin kung makaorder tayo ng meryenda sa umaga...

Chairman Gen, salamat sa masarap na pananghalian..

Sandrixx, may sukli ka pa...

riccisan

iTrader: (2)

ano ba yan! pati pansit kinunan!!! dinaan ko na lang sa food yung frustration ko! pero still, proud ako at i finished the course kahit walang cvd! hinanap ko talaga pero wala.baka makita niyo sa al gosaibi pag nag punta kayo.

ang ginawa ko na lang, pinasakan ko ng electrical tape yung small hole para mag lock in place yung pinion. then i added a small super glue. pero nag lalaro pa rin yung differential rod. and importante lang eh mag lock on yung pinion in place. part nos. i can give later on so that i-order niyo ako if available na yung c-cards niyo

Note:PWEDE KAYA AKO MAG PA MEMBER SA PAYPAL if i have a card with VISA logo??

sir chairman, i think my cyclone belts will resign na. if the belts arrive hope you can teach me magkabit, takot ako kahit may manual, gusto ko ng expert advice.

green overcomer, if you stay in a camp like me. just go on with the driving line. i praktis kadalasan sa besketball.volleyball court and follow the lines.yun lang muna.

belated happy bday grizzle!!! next time bawal, maglaro pag may bday kasi niyayari ka nila eh! or pinagbigyan mo lang!

ill go for a main nxt series! gogogo. im using an antique technigold so i have 'new' and 'old' parts combined. the rest is up to me!! kainanan na!

green_overcomer

What is the best way to discharge a NiCd 1600mAh battery without using my RC car to do it? I learned na NiCads have "memories" so kailangan kong i-full discharge ang batteries ko. Hindi ko alam kung paano mag-di-discharge.

Baka meron ho ditong may TT01 ball bearings na gusto nyong ibenta. Pabili ho kung pwede pero sa next month na ang bayad dahil sa sweldo.

Many thanks for the advice.

riccisan

iTrader: (2)

green overcomer-full detailed pm for you. and check this out

http://is.med.ohio-state.edu/policies/battery.htm

as for me, i still use ni-cads. kasi yan ang readily available dito at meron siyang 'punch' na tinatawag. although maintenacne is hard kasi you have to discharge the batts. no problem sa vacuum cleaner ko! nag discharge na, nag linis na, pang isports pa!

sa panaginip lang yata ako magkaka Ni Mh

LAPU-LAPU

iTrader: (35)

Good Morning fellow ROCKERS! at magiging ROCKERS!

He! He! nagiging active na si green_overcomer sa treads at that's a good sign of progress sa hobby na ito! Welcome!

Well i have received a new Car from my company last night its a 2008 Nissan Pathfinder Silver color as in brand new replacing my GMC Tahoe that i normally used. The bad news i have received ticket parking violation sa visitors parking ng ARamco because i blocked a Hummer car at tumawag ng police ang me ari ng Hummer Hmpt! ang yabang!yari gulong ng Hummer sa akin naka spinners at low pro flat sya sa akin ngayon!

Normally tinatawag muna yan at sasabihan kami na ilipat ang car. at maging kami ganun ang ginagawa namin wait kami sa nagblock ng car kahit ilang oras pero hindi para tumawag ng police. na share ko lang.

Anyway nagdatingan na ang ibang orders namin sa tower hobbies at kukunin na lang para madistribute na sa mga nangangailangan.

Have a nice day to everybody!

grizzle

iTrader: (1)

Chairman Gen, congrats on your new 1:1 ride..

riccisan

iTrader: (2)

sir chairman congrats. hatid-sundo ulit ako ha??? joke3x.

eh alam niyo naman dito, walang considerasyon. kami nga eh, nag park sa may bus stop sa tapat ng Ramaniya, may umalis na sasakyan at pinalitan lang namin yung pwesto niya. pagbalik namin after mga 30 mins wala na yung company car namin! yun pala na-tow na at mahirap din ang kumuha ng towed na sasakyan.

Aramco bus stop daw yun, but we do not see any buses coming.

so yun lang, that incident is still fresh from our minds. driver pa noon si sir arden (the one invited with sir ivux home, now he's in al-jouf).

yehey nagdatingan na yung mga orders. meron ako doon im sure! tc at lunch time na.

CobraSVT

iTrader: (4)

Sir Gen, Wow!!! New ride!!! Congrats sir!!! But I have to admit, mas gusto ko padin yung TAHOE!!! MACHO!!!

Buti pa sila may bagong dating na parts! Kainggit! Baka may maaamot akong gulong dyan. Bayaran ko sa Friday. Baka tire inserts nalang ang gumulong sakin e.

Kita nyo yung for sale na Tamiya TRF414 sa for sale thread? Php4.5k lang!!! Gusto ko sana kaya lang mabibisto ako ni esmi na bibili ng bagong RC. Check it out!!!

riccisan

iTrader: (2)

yup i saw that one, ang ganda nga eh, kaya lang mahirap talaga magpa ship dito. nakakahinayang ang shipping cost.

LAPU-LAPU

iTrader: (35)

JUST AN EXPERT ADVICE AND OPINION I RATHER GO ON THE LATEST TA05 CHASSIS INSTEAD RATHER THAN GOING BACK TO THE OLD VERSION OF TRF KIT.

riccisan

iTrader: (2)

it seems that nagkakapaan kami ng cyclone ko. hope you have some extra parts for me, bilhin ko na lang.

i attached the cyclone exploded view, and here are the missing parts i need:

1. 75188a / 75188b (magkasama ito, Universal cross spider with allen screw)
2. B021 bearing (inassemble ko lang ulit, pero sira na yun)

i cannot use this pag wala ito, kasi umaalog yung rod pag lumiliko. pag wala talaga at di mahanap sa gosaibi, ill use one na nakakabit sa rear tires. di naman lumiliko yun.

bahala na. gud am everyone and thanks sir chairman for dropping by. nice car, dont go to womens market kasi baka pagkaguluhan kayo ng chicks

sir sandrixx, enjoy the DVD!!

ivux_silver

iTrader: (6)

Good Morning ROCKERS!

Check-out my new toy....

Ricci: the number you post is not available sa Tower. Padala mo nga sakin yung scan image ng nasira, we might be able to fabricate that, same what I did sa T-Max ko when my CVD broke. Naputol din yung pin na nagkokonekta sa hub and the shaft. We also need to measure yung original, dia & length so we know what we are looking for. I used an 2.5mm allen key to replace mine.

ivux_silver

iTrader: (6)

Dre, eto ba hinahanap mo...yung first una ???? yun sumunod is a 2.5mmx14.5mm pin