1:8 EP BUGGY (CASTER) or ANY BRUSHLESS CONVERSION THREAD
#16
Tech Master
iTrader: (6)
Hi azmin,
Just buy a hyper motor mount from www.rc-monster.com & you're half way there. Add another aluminium U section for battery on the left side of the buggy & you're ready to rock.
In fact, I just bought a motor mount on behalf of an acquaintance here in Miri.
Regards,
Joe Ling
In fact, I just bought a motor mount on behalf of an acquaintance here in Miri.
Regards,
Joe Ling
#19
Here's The Brushless Concept
#21
Tech Master
iTrader: (6)
Sure can share my learning pains so others won't have to...
1) What works in colder climate don't necessary work in our part of the world - Tried a doubledecker Mamba Max in my buggy but still approaching thermal. Also managed to fry at least 5 esc of various make (BK 9920, Quark monster pro) at USD20 a pop.
2) Some products don't work as advertised - MGM is one where I had bad experience with. Spec look so good but didn't last at all. Quark 125 is another.
So far, can remember these 2 only.
Regards,
Joe Ling
1) What works in colder climate don't necessary work in our part of the world - Tried a doubledecker Mamba Max in my buggy but still approaching thermal. Also managed to fry at least 5 esc of various make (BK 9920, Quark monster pro) at USD20 a pop.
2) Some products don't work as advertised - MGM is one where I had bad experience with. Spec look so good but didn't last at all. Quark 125 is another.
So far, can remember these 2 only.
Joe Ling
#22
Tech Lord
iTrader: (32)
Thx for d experience I was lucky not to pop any expen items I damage afew engines though, that's y I convert my CRT. Just tested my zippy 5000 they ran cool.thx for d punch setting. Any other tips? Wat diff oil r u running Front, center n rear?
Sure can share my learning pains so others won't have to...
1) What works in colder climate don't necessary work in our part of the world - Tried a doubledecker Mamba Max in my buggy but still approaching thermal. Also managed to fry at least 5 esc of various make (BK 9920, Quark monster pro) at USD20 a pop.
2) Some products don't work as advertised - MGM is one where I had bad experience with. Spec look so good but didn't last at all. Quark 125 is another.
So far, can remember these 2 only.
Regards,
Joe Ling
1) What works in colder climate don't necessary work in our part of the world - Tried a doubledecker Mamba Max in my buggy but still approaching thermal. Also managed to fry at least 5 esc of various make (BK 9920, Quark monster pro) at USD20 a pop.
2) Some products don't work as advertised - MGM is one where I had bad experience with. Spec look so good but didn't last at all. Quark 125 is another.
So far, can remember these 2 only.
Regards,
Joe Ling
#26
Bro...U seems to have lots of experiences (both cheap n expensive..hehe) and examined some ESCs and motors..
So any recomendation on POWERFUL MOTOR AND ESC?..What are the current top dog (in terms of quality and performance..not just big name) motor and ESC for 1:8 offroad?
Can get locally or need to buy from overseas?
About the Hyper 8 conversion......no need to drill the chasis??
So any recomendation on POWERFUL MOTOR AND ESC?..What are the current top dog (in terms of quality and performance..not just big name) motor and ESC for 1:8 offroad?
Can get locally or need to buy from overseas?
About the Hyper 8 conversion......no need to drill the chasis??
#27
Tech Master
iTrader: (6)
Hmm, what's a thread without lots of pics ? Let me rehash some older photos...
Sacker conversion 9XL 5S lipo with BK12020 esc. HN SBB shocks
Savage with FLM forward conversion on 5S lipo Feigao 9XL MMM. FLM tower + Nanda SBB shocks
HN CR X1 with Neu 1512 2600KV, 4S lipo, MMM, RCPD battery tray, RCM motor mount
HN X2 truggy powered by Neu 1515 2000KV motor MMM & 5S lipo. RCPD motor mount
The red one is going BL within the next 2 weeks. Will be using a Medusa 70mm 1600kv motor powered by 6S lipo & MMM
Sacker conversion 9XL 5S lipo with BK12020 esc. HN SBB shocks
Savage with FLM forward conversion on 5S lipo Feigao 9XL MMM. FLM tower + Nanda SBB shocks
HN CR X1 with Neu 1512 2600KV, 4S lipo, MMM, RCPD battery tray, RCM motor mount
HN X2 truggy powered by Neu 1515 2000KV motor MMM & 5S lipo. RCPD motor mount
The red one is going BL within the next 2 weeks. Will be using a Medusa 70mm 1600kv motor powered by 6S lipo & MMM
#28
Tech Master
iTrader: (6)
Hi Azmin,
For powerful motor & esc, I recommend the Neu 1512 series of motors for buggy & 1515 series of motor for truggy. As for 8th scale esc, I like the Castle Creations Mamba Monster Max V3.
Unfortunately, i don't know of anyone selling locally. Mostly from USA. Some places that sell these are :
www.rc-monster.com
www.impaktrc.com
The MMM esc is becomng more common. Even big web stores like those listed below are selling them :
www.amainhobbies.com
www.stormerhobbies.com
As for the hyper 8 conversion, u still need to drill a couple of holes for the homemade battery tray/holder unfortunately. There is no need to drill holes for the motor mount. It should fit in place of the factory stock plastic piece
For powerful motor & esc, I recommend the Neu 1512 series of motors for buggy & 1515 series of motor for truggy. As for 8th scale esc, I like the Castle Creations Mamba Monster Max V3.
Unfortunately, i don't know of anyone selling locally. Mostly from USA. Some places that sell these are :
www.rc-monster.com
www.impaktrc.com
The MMM esc is becomng more common. Even big web stores like those listed below are selling them :
www.amainhobbies.com
www.stormerhobbies.com
As for the hyper 8 conversion, u still need to drill a couple of holes for the homemade battery tray/holder unfortunately. There is no need to drill holes for the motor mount. It should fit in place of the factory stock plastic piece
Bro...U seems to have lots of experiences (both cheap n expensive..hehe) and examined some ESCs and motors..
So any recomendation on POWERFUL MOTOR AND ESC?..What are the current top dog (in terms of quality and performance..not just big name) motor and ESC for 1:8 offroad?
Can get locally or need to buy from overseas?
About the Hyper 8 conversion......no need to drill the chasis??
So any recomendation on POWERFUL MOTOR AND ESC?..What are the current top dog (in terms of quality and performance..not just big name) motor and ESC for 1:8 offroad?
Can get locally or need to buy from overseas?
About the Hyper 8 conversion......no need to drill the chasis??
#29
Hmm, what's a thread without lots of pics ? Let me rehash some older photos...
Sacker conversion 9XL 5S lipo with BK12020 esc. HN SBB shocks
Savage with FLM forward conversion on 5S lipo Feigao 9XL MMM. FLM tower + Nanda SBB shocks
HN CR X1 with Neu 1512 2600KV, 4S lipo, MMM, RCPD battery tray, RCM motor mount
HN X2 truggy powered by Neu 1515 2000KV motor MMM & 5S lipo. RCPD motor mount
The red one is going BL within the next 2 weeks. Will be using a Medusa 70mm 1600kv motor powered by 6S lipo & MMM
Sacker conversion 9XL 5S lipo with BK12020 esc. HN SBB shocks
Savage with FLM forward conversion on 5S lipo Feigao 9XL MMM. FLM tower + Nanda SBB shocks
HN CR X1 with Neu 1512 2600KV, 4S lipo, MMM, RCPD battery tray, RCM motor mount
HN X2 truggy powered by Neu 1515 2000KV motor MMM & 5S lipo. RCPD motor mount
The red one is going BL within the next 2 weeks. Will be using a Medusa 70mm 1600kv motor powered by 6S lipo & MMM