Billy Kelly

iTrader: (9)

Non standard. A few of us tried to forewarn in the Facebook group that the odd size was gonna be a problem. Didn’t work

Nineball

It will be interesting to see how this turns out. Nobody makes bodies or tires in this new size other than traxxas. No other manufacturer is going to abandon the 1/10 touring car just to follow traxxas. Tracks will need a special class for the 3.0. Protoform/Proline are Horizon now, so they probably won't be in a hurry to support the competition.

Traxxas would have been better off revamping the X01 to compete with the Felony/Infraction/Limitless. Granted, that's another chassis in a weird scale... but that aftermarket has quickly grown. Or rather, they should have gone to 1/8 scale to compete with Xray/Serpent/etc.

fyrstormer

iTrader: (1)

It's very likely that Traxxas isn't concerned with attracting racers anyway. They're going to sell the 4-Tec 3.0 Corvette to casual RCers who want one.

Roelof

QUICK FEATURES ON 4-TEC 2.0 AWD CHASSIS (#83024-4) *

• Adjustable chassis accepts standard 200 mm bodies
• Full-time 4WD
• TQ™ 2.4GHz radio system
• Waterproof electronics for all-weather, all-season R/C excitement
• Titan® 12-Turn 550 modified motor
• Powerful XL-5 waterproof electronic speed control
• Built brushless ready for easy upgrade to Velineon® power
• Low-CG fiber-composite monocoque chassis with high approach angle front bumper
• Race-proven sealed differentials

Roelof

Oeps, no edit?

These are the specs of the 3.0Length: 19.4 inches (492mm) Front Track: 8.1 inches (204mm) Rear Track: 8.0 inches (202mm) Total Width (mirrors): 8.9 inches (227mm) Ground Clearance: 0.3 inches (9mm) Weight: 3.92lbs (1.78kg) with body (no battery) Height (ride): 5.1 inches (130mm) Wheelbase: 11.3 inches (288mm) Shock Length: Short (front and rear


200mm width, so no GT spec

Nineball

At the least, based on the number of speed run 4tecs I've seen, the new car could be ideal. It could even be a weapon at the drag track. But if you drift or race any other class, Traxxas no longer has a car for you.

bradlee1212

iTrader: (4)

hahaha true

Fele

Solid vehicle. Its taken off with interest at our local track with newer folks

SpongeCenter

Wow!
Thanks for the information about Mustang.

supremecitystor

Thanks for the information about Mustang.

Keeper006

Does anybody make a 6th generation Camaro body for these?

chaunceydelgado

I'm not sure as I haven't tried them myself. I attempted to order the Cobra and Fox body models directly from them, but it seems they don't ship to the US. However, I've noticed some of their models being sold on eBay at a higher price, and my brother mentioned that there might be a person associated with them on Facebook through whom you can obtain them. They offer a lot of fantastic products, so hopefully, as their popularity grows, they will become more accessible. I'm particularly interested in getting the Regal/Grand National body as well.

flymetonight

Are you guys drifting these outside? Any good?
I like these cars have covered spurgear, makes them good outside at parking lot
also drifting outside at parkin lot

Is this TRX good drift with?
easy set up? tune ?
Is there any adjustable Linkage kit you can buy to this?

When will TRX make these adjustable from box?

flymetonight

Like these things in picture

flymetonight

Hmmmm i can not edit my post here at indistry news

That kit in picture is for WL toys, just wonder if it is possible buy something like this to these TRX cars?
Will they fit? what size do you use guys