Tamiya TB-Evolution III
#2716
The option parts are blue
#2717
WOOHOO! i'm gonna anidize my spool blue aswell, when troy has them reedy
#2718
rtypec
Can you please verify the inner camber link spacing on Taka's set-up? I have the Surikarn Evo3. Thanks a lot!
Jayjay
Jayjay
#2719
Yup, the inner camber link spacing is correct. Sorry I forgot to mention it earlier today. It's F 7.5mm and R 3.5mm I'll test the setup once I get the parts. Please note that Taka's setup is for a high grip indoor asphault track and may not be suitable for parking lots or loose outdoor conditions.
cheers
cheers
#2720
Originally posted by Difuser
the 16oz can is guaranteed to prevent any 5 min coma from happening
the 16oz can is guaranteed to prevent any 5 min coma from happening
Here's something funny Dan once said:
Originally posted by Difuser
I am slow
I am slow
#2722
Tech Elite
iTrader: (2)
16oz is Rockstar all the way you oughtta try it Rod. To me it tastes better than Red Bull
I am slow it's just everybody else is slower hahha.
Pete's been bragging how fast he is but when any lap times are printed he is magically slower I haven't figured it out yet???
He swears he was 1sec a lap faster in the quals hmmmmm
It should be fun this weekend Pete's always fun to hack.
I made the mod like Taka's to try out I am still hoping I'll have the Red version to work with this weekend.
Oh 2nd place IIno? Is that IIno from sales, fresh over from Japan if so he was a blast to run with over at Shizuoka.
I am slow it's just everybody else is slower hahha.
Pete's been bragging how fast he is but when any lap times are printed he is magically slower I haven't figured it out yet???
He swears he was 1sec a lap faster in the quals hmmmmm
It should be fun this weekend Pete's always fun to hack.
I made the mod like Taka's to try out I am still hoping I'll have the Red version to work with this weekend.
Oh 2nd place IIno? Is that IIno from sales, fresh over from Japan if so he was a blast to run with over at Shizuoka.
#2723
Tech Master
ive got a chance to buy an evo 3 s for about btween 400-500 £.
is it worth it?brand new never opened etc.
is it worth it?brand new never opened etc.
#2724
Tech Fanatic
Nope its not worth it, just get on to Rainbowten and order one from them, it will be cheaper, also be unopened and be with you in 3 days. Rick
#2725
Yup, that's the same Shin...he's pretty quick. Carl and I were gaining on him at the end and I was preparing to overtake Carl when Taka came up to lap us and took me out. Hahaha is that how team tactics work? Lol it was good fun.
I remember seeing a website once that had pictures on how to remove metal shields from bearings. It was cool because it showed you where to look on the bearing to stick your thingy in. If anybody knows where that site it, I would greatly appreciate it.
Edit: Nevermind, I found it - http://www.schumacher.clara.net/bearings.htm
cheers
I remember seeing a website once that had pictures on how to remove metal shields from bearings. It was cool because it showed you where to look on the bearing to stick your thingy in. If anybody knows where that site it, I would greatly appreciate it.
Edit: Nevermind, I found it - http://www.schumacher.clara.net/bearings.htm
cheers
Last edited by rtypec; 06-27-2003 at 09:53 AM.
#2726
Tech Regular
Originally posted by trf racer
ive got a chance to buy an evo 3 s for about btween 400-500 £.
is it worth it?brand new never opened etc.
ive got a chance to buy an evo 3 s for about btween 400-500 £.
is it worth it?brand new never opened etc.
Order a kit from Rainbow Ten and it will not only cost you alot less but you will get the kit in just a few days.
#2727
Tech Elite
iTrader: (2)
Rod I use a #11 blade and use the back of the tip if that makes sense the key is when looking at the bearing look for where the snap ring goes in and look for the / / space inbetween and hook your blade in the left side as above the right side is impossible to "hook" with the blade.
Hopefully it all makes sense
Hopefully it all makes sense
#2728
Tech Master
bloody apex models and rip off uk!u no there selling a 414m2 wcr for £585 and i got mine for £450! bloody rip off!rick draper how much is it althogether including import tax etc,etc?dose it get delivered to ur doorstep?u no at rainbow ten there only £250
#2729
Originally posted by Difuser
Rod I use a #11 blade and use the back of the tip if that makes sense the key is when looking at the bearing look for where the snap ring goes in and look for the / / space inbetween and hook your blade in the left side as above the right side is impossible to "hook" with the blade.
Hopefully it all makes sense
Rod I use a #11 blade and use the back of the tip if that makes sense the key is when looking at the bearing look for where the snap ring goes in and look for the / / space inbetween and hook your blade in the left side as above the right side is impossible to "hook" with the blade.
Hopefully it all makes sense