Tamiya TB Evo 6
#1741
Tech Elite
iTrader: (95)
Maybe someone can help me understand this better, I have bought a black 2nd hand only to realise that I couldn't get replacement parts, granted the car is in top shape but spares are always handy, now my question is why? Why no parts for the black? I understand its a limited edition but did tamiya think that if you say damaged a shock, you would replace it with a blue trf? Or wanted a replacement centre shaft that you would replace it with a blue one. Or should, after forking out quite a large sum of money for the black, condemn it to a life of shelf queen?
I have not run it yet as after I realised there was no part availibility I'm to scared to. Am probably going to get the exo6 conversion and some blue parts, thinking I should have maybe bought the blue model instead.
I have not run it yet as after I realised there was no part availibility I'm to scared to. Am probably going to get the exo6 conversion and some blue parts, thinking I should have maybe bought the blue model instead.
#1743
Tech Elite
iTrader: (89)
Join Date: Aug 2009
Location: " The World's Most Famous Beach "
Posts: 2,308
Trader Rating: 89 (100%+)
maybe someone of you remember me by having problems at first, including material and grip problems,
after some time, the car feels better and better
And thank you guys, for some tipps about setup ....
i could manage to get TQ last weekend, in our 17,5T blinky race. (LRP Challenge)
And won the first A main too, but then, after leading in the 2nd and 3rd until 1 minute to go, i got that nervous to loose the race, and finish as 2nd overall...
But still i am happy
23 entries and really fast competitors ..
after some time, the car feels better and better
And thank you guys, for some tipps about setup ....
i could manage to get TQ last weekend, in our 17,5T blinky race. (LRP Challenge)
And won the first A main too, but then, after leading in the 2nd and 3rd until 1 minute to go, i got that nervous to loose the race, and finish as 2nd overall...
But still i am happy
23 entries and really fast competitors ..
#1744
Tech Elite
iTrader: (66)
I'll get a couple pics of mine up later. I bought 2 black editions since I generally don't like anno of any color for all the aluminum parts. Black and gunmetal generally look the best with splashes of color.
As far as replacement parts all of the plastics are the same for both kits. Only the black anno parts are different. And other than ball studs I don't really see anything else needing replacement. It might be cheaper to find another used black edition for those few parts that might bend/break. Also for the tie blocks, Exotek makes black ones that fit so you should be covered there.
The car is great BTW. Mine was pretty good from the start with a very drivable set up. Just fine tuning now.
As far as replacement parts all of the plastics are the same for both kits. Only the black anno parts are different. And other than ball studs I don't really see anything else needing replacement. It might be cheaper to find another used black edition for those few parts that might bend/break. Also for the tie blocks, Exotek makes black ones that fit so you should be covered there.
The car is great BTW. Mine was pretty good from the start with a very drivable set up. Just fine tuning now.
#1745
#1746
Tech Elite
iTrader: (66)
He are my black edition Exo6's with some "splashes" of blue.
I already have to add weight to both to make 1450 and 1550g, so as much as I want a few blue alumnum screws in going to refrain for now on those. Finding places to put the weight whime maintaining balance is hars, especially with the Exo aluminum chassis.
I already have to add weight to both to make 1450 and 1550g, so as much as I want a few blue alumnum screws in going to refrain for now on those. Finding places to put the weight whime maintaining balance is hars, especially with the Exo aluminum chassis.
#1747
Tech Fanatic
iTrader: (33)
Yes unfortunately there is no place in the states that I could find that has the black parts. I did however find them in Europe and Australia. Google evo6 and scroll couple of pages. They have an ebay too! You will have to pay a lot in shipping tho! Since I converted mine to the Evo conversion I'm ok with the black and blue parts. The exo conversion works great.
#1749
http://sakaguchinetshop.com/product_...oducts_id=2155
shipping to U.S is about 12,5 Euro
#1750
Or if you insist on buying in the states, get the white cups from VBC and change ball studs.
#1751
not in the U.S. but available..
http://sakaguchinetshop.com/product_...oducts_id=2155
shipping to U.S is about 12,5 Euro
http://sakaguchinetshop.com/product_...oducts_id=2155
shipping to U.S is about 12,5 Euro
here the correct link for the white ones
http://sakaguchinetshop.com/product_...oducts_id=2154
#1753
Tech Initiate
https://www.tamiyausa.com/product/it...oduct-id=84425
http://www.tamiya.com/japan/news/new...04/201604a.pdf
http://www.tamiya.com/japan/news/new...04/201604a.pdf
Last edited by e58105419; 03-03-2016 at 03:57 AM.
#1754