kwiksi

iTrader: (125)

Cut shafts front and rear?

haywood

iTrader: (49)

Yes.

NITROmmm

iTrader: (3)

Would like to know a gearing start point for the Mi5 with 4.5t?

TryHard

iTrader: (4)

What motor and ESC?
With the HW V3, and MuchMore 4.5t, I'm running 114spur and 26pinion, which gives 7.89FDR.
This is with 20° on the motor, and the using 22° of boost, and 20° of turbo on the ESC.

HiH
Ed

poochy

iTrader: (11)

in regards to the castor block bolt fix, how much filing does the aftermarket bolt need (.5mm, 1mm etc..)?

also how does the granger kit ashpalt setup compare to the hofer stnadard asphalt setup?

NITROmmm

iTrader: (3)

Thanks Ed.
V3.1 HW, trinity duo 3.5.
Only standard 85t spur atm .
For openbitumen track at littlehampton.

Steve.

OVA

iTrader: (86)

Try hard
are you runing rear or med motor set up?
I run my first 17.5 med motor set up and it was okay..needs a little more off power streering..

kwiksi

iTrader: (125)

I just did the castor block m4x14 bolt fix. It felt like the end of the screw was hitting the cva axle so I dremeled less than .5mm off and it's all good.

TryHard

iTrader: (4)

I have run my car only in rear motor, don't have the mid-motor conversion, and probably wont get it until I build up a stock class car.
Do you have a copy of your setup, can suggest some things to try to gain the steering then.

HiH
Ed

TryHard

iTrader: (4)

For littlehampton, it would be worth get hold of Antoni Caretti, or Peter Dooley... both I believe are running there in preperation for the nats, so should be able to give you some advice on gearing and speedo setup

HiH
Ed

haywood

iTrader: (49)

Anyone having any luck out there? Mid motor or rear motor working better on the high bite ?

cgroves

I'm having good luck with mid-motor running relatively soft (Yoko pink & blue) and flat links. No spacers under the arm screws. Only saucing rears it doesn't want to roll badly and the speed seems good and steering is great. That being said, Adam is having a lot of luck with a relatively stiff setup and rear motor. I'll post up the final setups when I get to my laptop at home next week.

olhipster1

iTrader: (102)

is there a download for a editable Setup sheet?
would like to post up my carpet setup...
working great for me....

Sorry to drop this post...but kinda limited on time...work has taken over my life

Shock Tower

Here

http://www.petitrc.com/reglages/schu...SetupSheet.pdf

haywood

iTrader: (49)

Any positive results or setups from the week in Sin City? Been pretty quiet.