|
Originally Posted by JustinL7294
(Post 16258673)
can a base tt-02 be converted into the tt-02 srx? if so is there a kit to start with or a list of what parts would be needed?
dm me and I can send you pics of everything. |
Originally Posted by Monotremata
(Post 16258042)
Haha perfect, got a whole bunch of blue AE 1mm and 2mm washers ready to go. :nod: Don't want to risk messing up my oil filled diff and coupler! Ordered a pack of various socket head hex screws too, so now I got the hex head screws covered, those should be here tonight at some point.
Now I got my 3mm and 5mm shims, hard chassis, and a fresh pack of USGT tires (TQ RC was out of the belted ones :cry:). Time to switch over the chassis, get rid of the remaining slop, and go back through and make sure I loctite everything that needs to be this time just to be safe. Just discovered the Cal Raceway down in Orange last week too. Might have to go pick up a 911 GT3 R body now so I can get some practice in their Porsche class before the TCS at Revelation next month heh. |
Originally Posted by TonysScrews
(Post 16258705)
Not sure if you are running on asphalt or carpet, but the USGT tires we run on asphalt and the belted USGT tires we run on carpet. If you need the belted ones for carpet, drop me a PM, I have a lot of them.
This will be all asphalt. I honestly don't think there are any carpet tracks anywhere near here in So Cal, indoor or outdoor. Even Tony's Hobbies, the track is inside the back of the warehouse, its all dirt (but now they wont let you run anything but slicks on it, all my Hole Shots down the drain heh). Its nice for me, I'm old school and like my off-road buggies in the dirt and my TT-02 on a real track. |
Originally Posted by JustinL7294
(Post 16258673)
can a base tt-02 be converted into the tt-02 srx? if so is there a kit to start with or a list of what parts would be needed?
|
Originally Posted by JustinL7294
(Post 16258673)
can a base tt-02 be converted into the tt-02 srx? if so is there a kit to start with or a list of what parts would be needed?
|
Originally Posted by magnumcyclonex
(Post 16258838)
It's possible. If you really want to do this, go to Tamiya's website to look up all the option parts the SRX offers, and source those parts individually. However, it's much easier to just get the SRX kit and be (mostly) done with hopping up the car.
|
Bookface is quite active with people doing TheRCRacer's TT-02F print & build. Have any of you here tried it yet?
If so, how do you like it? |
Originally Posted by JustinL7294
(Post 16258673)
can a base tt-02 be converted into the tt-02 srx? if so is there a kit to start with or a list of what parts would be needed?
The TT02 S package for the suspension mounts 54634 https://www.amainhobbies.com/tamiya-...EqKAA2qSmDK3aE Next you can get the 420 arms upgrade package 54886 https://www.amainhobbies.com/tamiya-...54886/p1141175 Last you would need the TT02S shock towers: Kit graphite: 4305647, 4305646 carbon: 54362/54363 or after markets one’s |
TT-02 911
My TT-02 is finished for now. Special thanks to the guy who uploaded the Fuchs wheels to Bambu Studios.https://cimg8.ibsrv.net/gimg/www.rct...afc6685ebb.jpg
https://cimg1.ibsrv.net/gimg/www.rct...4918afc01e.jpg https://cimg2.ibsrv.net/gimg/www.rct...28247d9c95.jpg |
I am interested in RCRacer's FWD conversion too. Particularly on a TT02 SRX.
|
https://cimg1.ibsrv.net/gimg/www.rct...9db246a2ce.png
unfortunately those are too long, you will never get the right wheel base and Tamiya USA is sold out of the correct ones. I ventured down that path a few yrs ago and the project still sits on my work bench. the only real way to get those is to purchase the SRX kit. |
That looks smashing! I have the Carrera RSR that I built a chassis up for but haven't done the body just yet. Those 3d printed Fuchs wheels look spot on, I'd say even better than the tamiya ones
|
Originally Posted by tboned_2002
(Post 16259427)
https://cimg1.ibsrv.net/gimg/www.rct...9db246a2ce.png
unfortunately those are too long, you will never get the right wheel base and Tamiya USA is sold out of the correct ones. I ventured down that path a few yrs ago and the project still sits on my work bench. the only real way to get those is to purchase the SRX kit. |
They will function mechanically, but if you're trying to convert a TT-02 to an SRX setup with the intention of using Tamiya bodies, the result isn’t ideal. The wheelbase ends up being too long when using the inserts mentioned earlier—especially when paired with a Tamiya pre-cut body. I went down this path myself, and while it technically fits, it ends up looking off. Trust me—you’ll want to locate the correct inserts shown below for a proper fit, or simply go with an SRX kit..
Whats the part # for the S Parts Bag and is that from the SRX? https://cimg5.ibsrv.net/gimg/www.rct...d25866c9ac.png |
Originally Posted by tboned_2002
(Post 16259622)
They will function mechanically, but if you're trying to convert a TT-02 to an SRX setup with the intention of using Tamiya bodies, the result isn’t ideal. The wheelbase ends up being too long when using the inserts mentioned earlier—especially when paired with a Tamiya pre-cut body. I went down this path myself, and while it technically fits, it ends up looking off. Trust me—you’ll want to locate the correct inserts shown below for a proper fit, or simply go with an SRX kit..
Whats the part # for the S Parts Bag and is that from the SRX? https://cimg5.ibsrv.net/gimg/www.rct...d25866c9ac.png Tamiya makes bodies in 257 and 251 wheelbase. Majority of the 1/10 bodies are 257 mm bodies that work with the SRX. There are only a handful of 251s, mainly the Porsche 911s, new Audi Quattro IMSA. The Mercedes AMG GT3 originally was 257, new version that just dropped is 251 mm. |
| All times are GMT -7. It is currently 03:23 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.