WRC Racing STX EP touring car
#61
who in North America will be carring this kit and parts
#62
Tech Adept
i don't know, but you can get in touch with mikimodel, the italian distributor ([email protected]) and he will be very happy to assist you
#63
i don't know, but you can get in touch with mikimodel, the italian distributor ([email protected]) and he will be very happy to assist you
for all, if you want to buy STX Kit, just contact Michele Cancemi by email [email protected]
soon there will be a dealer in US
#64
Tech Adept
tomorrow my kit should arrive at home :sn eaky:, i'll revert with first impression asap
Ciao
Max
Ciao
Max
#65
^ please do, I emailed mikimodel, and no reply, so will just wait for a us distributor, or get another car
#66
Tech Adept
#67
Tech Adept
kit delovered at noon time , this evening i'll start the assembly, i'll revert asap with impression
#68
still no reply, send a pm to ^ and an email to mikimodel, a well, just preordered the new s411 serpent kit, hope your build is going well please post pictures and impressions, I really wanted this kit, but with no one willing to reply to me was a dissapointment
#69
Tech Adept
Ciao to all,
yday night spent assembling the kit , all well packed and each bags contain only the hardware needed for th specific step, so no way to loose or mismatch the screw etc... good job WRC!
The material used seems of top quality the chassis is well cutted, ad most important the screw hole match the corresponding support (diff, motor mount, etc).
A very helpfull solution have been achived numbering the setting hole in the belt tensioner and a pin onto the side diff support, much easier then the tc6........
Tomorrow night i'll test it and i'll post my impression.
At the time being i'm very happy of this car, the assembly is very easy and all parts fitt one each other smootly.
Ciao
Max
yday night spent assembling the kit , all well packed and each bags contain only the hardware needed for th specific step, so no way to loose or mismatch the screw etc... good job WRC!
The material used seems of top quality the chassis is well cutted, ad most important the screw hole match the corresponding support (diff, motor mount, etc).
A very helpfull solution have been achived numbering the setting hole in the belt tensioner and a pin onto the side diff support, much easier then the tc6........
Tomorrow night i'll test it and i'll post my impression.
At the time being i'm very happy of this car, the assembly is very easy and all parts fitt one each other smootly.
Ciao
Max
#70
any updates
#71
Tech Adept
So car placed on the asphalt track surface and 5 minutes run done.
Good impression, but the set up was not good for the track, all my efforts was pointed to the F1, as italian championship is next month and i need to improve my feeling with such car.
Anyhow i have alreadu an idea of set up changes to be performed and i'm confident of a good result. All going well next week i shold be able to perform other test and i'll revert with improvement and set up used.
Ciao
Max
Good impression, but the set up was not good for the track, all my efforts was pointed to the F1, as italian championship is next month and i need to improve my feeling with such car.
Anyhow i have alreadu an idea of set up changes to be performed and i'm confident of a good result. All going well next week i shold be able to perform other test and i'll revert with improvement and set up used.
Ciao
Max
#72
Finally! I had my STX!
built in about 4 hours on my home track, I did 1-2 run, with kit setup, the second lap I equaled my best lap on this track! I am really happy!
materials are really good, the steering system fabulous, the car has a lot of flex and steering, even with 3 reinforcements on topdeck, rear il very stable, no tweak problem, excellent smoothness.
here is some photos taken by my girlfriend, because I was too busy to build it!
Now we prepare for the italian nats of 23/24 February, where we hope to get a good result with this wonderful model!
built in about 4 hours on my home track, I did 1-2 run, with kit setup, the second lap I equaled my best lap on this track! I am really happy!
materials are really good, the steering system fabulous, the car has a lot of flex and steering, even with 3 reinforcements on topdeck, rear il very stable, no tweak problem, excellent smoothness.
here is some photos taken by my girlfriend, because I was too busy to build it!
Now we prepare for the italian nats of 23/24 February, where we hope to get a good result with this wonderful model!
#74
Tech Adept
Ciao ElectricMan,
next 23rd feb here in Italy we race the indoor Italian AMSCI championship F1 and 1/12 scale, so at the time being all our efforts are pointed to such event.
However last sunday i made some test, the car is very sensible to any change to the set up and i like very much the steering system.
We'll keep you duly posted with any news.
Ciao
Max
next 23rd feb here in Italy we race the indoor Italian AMSCI championship F1 and 1/12 scale, so at the time being all our efforts are pointed to such event.
However last sunday i made some test, the car is very sensible to any change to the set up and i like very much the steering system.
We'll keep you duly posted with any news.
Ciao
Max