Yokomo MR4TC-BD
04-23-2006, 10:48 AM
#4970
Originally Posted by smojoe
can someone give me an estimate on how much a used (but well taken care of) BD goes for? (w/o spares)
04-23-2006, 02:14 PM
#4972
Alright my fellow BD owners I have PLENTY OF SPARES for your cars so make me a list and help me rid my stash. I have enough stuff to build another but I'm getting lazy so decide what you 'need' 
and look me up. Hell why not just take it all off my hands and save me the trouble.
99.6% of everything below is NIP... SHOP AWAY
BD-002G -$64.95
BD-003UG -$13.95
BD-503 (2) -$4.75
ZS-508 (4) -$5.00
BD-189L (2) -$5.99
BD-516L (2) -$7.99
ZC-N4AFB (3) -$3.99
BD-300RL -$50.89
BD-300RR -$42.70
BD-300FL -$20.86
BD-300FR -$20.86
BD-300CA -$20.86
BD-300CB -$20.86
SD-415SG (2) -$7.95
ZS-011EL (2) -$7.95
BD-300S -$4.75
SD-501R (2) -$2.50
BD-BBP (3) -$44.95
BD-671 -$25.99
BD-674 -$11.50
ZS-507 (4)- $2.85
ZS-508S (3) -$2.50
ZS-414 -$2.50
ZC-BH2655T -$2.99
SD-640TM -$1.00
ZC-206L (2) -$2.49
SD-009H (2) -$5.00
SD-009 (2) -$7.25
ZS-506 (3) -$2.75
ZS-507T (4) -$8.50
ZD-505T (4) -$9.99
ZS-010TP (4) -$2.75
BD-118T (5) -$5.75
BD-501SAS (3) -$15.99
SD-300R25 (2) -$15.99
BD-TSS -$35.99
BD-017G -$11.50
BD-018G -$13.25
SQUARE STY-9 -$16.99
SD-001FS (2) -$4.95
RS-04 -$3.99
RS-02 -$3.99
RS-01 -$3.25
RS-11 -$3.99
RS-12 -$3.99
HPI Diff balls A157 (2) -$10.99
RCScrews Stainless Steel screw set (2) #yok.011 -$18.00
EXCEL Diffs (3) -$19.99
*In the small plastic bin-
Yokomo Shock sets LONG & SHORT -$33.99/28.99
RAYSPEED SPRINGS (12pair) -$4.50each
YOKOMO SPRINGS (10pair) -$5.00each
*In the large plastic bin-
Speedtech Spool -$29.99
Alum. Spool -$22.99
Complete diff assemblies (2) -$21.99
One-way -$38.99
TC4 ALUMINUM CVD's (2) -$19.99
TC3 HD drive cups (for one-way) -$18.99
P-DUB Bumpers (3) -$9.99
Also in the large plastic bin are the front & rear arms which are all unused. Also all the c-hubs, spur gears, 0 and 1-degree steering blocks, ballcups, spacers, and 3-4 sets of CVD's and universals.
Make me an offer and we'll go from there... Have fun
and look me up. Hell why not just take it all off my hands and save me the trouble.99.6% of everything below is NIP... SHOP AWAY
BD-002G -$64.95
BD-003UG -$13.95
BD-503 (2) -$4.75
ZS-508 (4) -$5.00
BD-189L (2) -$5.99
BD-516L (2) -$7.99
ZC-N4AFB (3) -$3.99
BD-300RL -$50.89
BD-300RR -$42.70
BD-300FL -$20.86
BD-300FR -$20.86
BD-300CA -$20.86
BD-300CB -$20.86
SD-415SG (2) -$7.95
ZS-011EL (2) -$7.95
BD-300S -$4.75
SD-501R (2) -$2.50
BD-BBP (3) -$44.95
BD-671 -$25.99
BD-674 -$11.50
ZS-507 (4)- $2.85
ZS-508S (3) -$2.50
ZS-414 -$2.50
ZC-BH2655T -$2.99
SD-640TM -$1.00
ZC-206L (2) -$2.49
SD-009H (2) -$5.00
SD-009 (2) -$7.25
ZS-506 (3) -$2.75
ZS-507T (4) -$8.50
ZD-505T (4) -$9.99
ZS-010TP (4) -$2.75
BD-118T (5) -$5.75
BD-501SAS (3) -$15.99
SD-300R25 (2) -$15.99
BD-TSS -$35.99
BD-017G -$11.50
BD-018G -$13.25
SQUARE STY-9 -$16.99
SD-001FS (2) -$4.95
RS-04 -$3.99
RS-02 -$3.99
RS-01 -$3.25
RS-11 -$3.99
RS-12 -$3.99
HPI Diff balls A157 (2) -$10.99
RCScrews Stainless Steel screw set (2) #yok.011 -$18.00
EXCEL Diffs (3) -$19.99
*In the small plastic bin-
Yokomo Shock sets LONG & SHORT -$33.99/28.99
RAYSPEED SPRINGS (12pair) -$4.50each
YOKOMO SPRINGS (10pair) -$5.00each
*In the large plastic bin-
Speedtech Spool -$29.99
Alum. Spool -$22.99
Complete diff assemblies (2) -$21.99
One-way -$38.99
TC4 ALUMINUM CVD's (2) -$19.99
TC3 HD drive cups (for one-way) -$18.99
P-DUB Bumpers (3) -$9.99
Also in the large plastic bin are the front & rear arms which are all unused. Also all the c-hubs, spur gears, 0 and 1-degree steering blocks, ballcups, spacers, and 3-4 sets of CVD's and universals.
Make me an offer and we'll go from there... Have fun
Last edited by JayBee; 09-12-2008 at 09:32 PM.
04-23-2006, 11:10 PM
#4974
I think you already post this for sale items few weeks/months ago? No one make offer? 
04-24-2006, 01:53 AM
#4975
Hi guys,
JayBee I'm interested in the excel diff outdrives, they do look cooler! 
Was at bedworth BTCC this weekend testing and racing on sunday, had a good weekend putting the car in the stock A main. Luckily on saturday all the top modified lads (andy moore, chris grainger etc.) were all testing for next weeks national, so they were good to watch! I gave the SDW rear tower (2mm higher than std, I think this is what the new masami 1 does) a try, it didn't handle the bedworth bumps as well but it did provide a lot more turn-in, but it wasn't loose. In a word, impressed The SDW tower does need some mods to work. Firstly, you need to file away at the material that would sit next to the rear diff pulley, as the tower fouls it and locks the transmission. Also, because it is narrower, you need to swap the sides your bodyposts are on, to fit the same holes in your shell. I believe this is all sorted on the masami BD rear tower.
I also spoke to chris about the new yokomo white springs. He didn't have any lb ratings but he told me the similar equivelents.
(can't remember the colour mark of the new springs so bear with me, and don't take my every word for it!)
YOK PROGRESSIVE SPRING: HPI SPRING SIMILAR RAYSPEED SPRING
softest hpi blue rayspeed green
up a grade hpi silver rayspeed blue
up a grade between silver/pink between blue/yellow
up a grade hpi pink rayspeed yellow
and so it goes on, being similar to the rayspeed springs but they give a much better feel on the track. I felt the HPI springs were a big improvement over the rayspeed ones, so the new yok springs should be good.
JayBee I'm interested in the excel diff outdrives, they do look cooler!
Was at bedworth BTCC this weekend testing and racing on sunday, had a good weekend putting the car in the stock A main. Luckily on saturday all the top modified lads (andy moore, chris grainger etc.) were all testing for next weeks national, so they were good to watch! I gave the SDW rear tower (2mm higher than std, I think this is what the new masami 1 does) a try, it didn't handle the bedworth bumps as well but it did provide a lot more turn-in, but it wasn't loose. In a word, impressed
The SDW tower does need some mods to work. Firstly, you need to file away at the material that would sit next to the rear diff pulley, as the tower fouls it and locks the transmission. Also, because it is narrower, you need to swap the sides your bodyposts are on, to fit the same holes in your shell. I believe this is all sorted on the masami BD rear tower.I also spoke to chris about the new yokomo white springs. He didn't have any lb ratings but he told me the similar equivelents.
(can't remember the colour mark of the new springs so bear with me, and don't take my every word for it!)
YOK PROGRESSIVE SPRING: HPI SPRING SIMILAR RAYSPEED SPRING
softest hpi blue rayspeed green
up a grade hpi silver rayspeed blue
up a grade between silver/pink between blue/yellow
up a grade hpi pink rayspeed yellow
and so it goes on, being similar to the rayspeed springs but they give a much better feel on the track. I felt the HPI springs were a big improvement over the rayspeed ones, so the new yok springs should be good.
Last edited by Ali Graham; 04-24-2006 at 05:08 AM.
04-24-2006, 04:55 AM
#4976
Originally Posted by daniz24
I think you already post this for sale items few weeks/months ago? No one make offer?
Now there's just all the spares left 
04-24-2006, 01:19 PM
#4977
Tech Regular
shock tower
does anyone know where i can buy the new masami rear shock tower from and is there a difference from the std shock tower??
04-24-2006, 01:32 PM
#4978
Tech Master
iTrader: (1)
Originally Posted by mwoods
does anyone know where i can buy the new masami rear shock tower from and is there a difference from the std shock tower??
04-24-2006, 03:05 PM
#4980
Originally Posted by Jochim_18
Have anybody tried buying directly from YOKOMO USA? I wanted shop but I don't really know if they have parts on stock or not co'z it doesn't really tell you if they have it.
fast shipping too