Lazer Guy

iTrader: (1)

Are you drift racing ????? That might work if you are.

Sean T Guy

Rapid Racer,
I strongly reccommend you use a 1 way diff in the front and a spool in the back. You could also try square wheels and then I might out qualify you 2moro.
Seriously though I'm sure there will be a few people waiting to see how you find overdrive to the rear especially on carpet , I'll let you know how it looks after the qualifiers 2moro

Woz

can someone confirm what Li-Po batteries fit the Cyclone without modification, or with Slight Modification to the top deck brace.

otter pop

my orion 4800 fits right in

Marcos.J

iTrader: (239)

orion/peak 3200,orion/peak 3600,core r/c 5000,

rbalint

Hi!

Does anyone has any information of the new diff which was used at DHI this weekend?

http://events.redrc.net/wp-content/g...ark/HaraHB.jpg

Woz

has anyone tried fittin the trakpower li-po packs?

Marcos.J

iTrader: (239)

as long as the lipo pack is not taller than 23mm you should be ok

yyhayyim

iTrader: (26)

Trackpower packs do fit...a little snug, but they'll work

BlackedOutREVO

iTrader: (67)

Yeah, its nice there snug, they dont move when there taped in

dodgy

does anyone know where i can find some foam setups for the WCE cyclone,
i can not find one any where, thanks if you can help me.

2-Bad

iTrader: (24)

This one from Daisuke Yoshioka is the only one I've tried and I really liked it as it drove like a 1/12 scale it was that good (outdoors/asphalt/foams).

SantozRey

iTrader: (22)

Is the left/right weight difference that big when switching from NiCD to LiPo?

How will the car drive?

rcarmchl

iTrader: (15)

Hey REVO....I know you ahve been a big user of the Trakpower packs, have you had any issues? Any performance Drops? I have been 8using a Plat 4800 with no problems but want to pick up another pack and am considering the TP 4900.....input?

Rick Vessell

iTrader: (10)

Dodgy,

You have PM about setup