Hot Bodies Cyclone
#4052
Tech Champion
iTrader: (9)
Originally Posted by Scott B
Hi guys I trying to find the Servo Saver Body pt#75143. I've looked at speedtech, rcmart, rcmodel and stormer and can't find it. Does anyone know of any shops that have any or does anyone have an extra one they can sell me????
Thanks,
Thanks,
that's a common part for various HPI cars..
Tower has it...but not til early June.
If you get desperate...let me know... I'll pull the one out of my Pro4 and let you have it...car's sitting idle since I've got the Hara Cyclone now....
#4053
Tech Regular
Scott,
If its the same as the Pro I have one. Remind me on Friday.
If its the same as the Pro I have one. Remind me on Friday.
Originally Posted by Scott B
Hi guys I trying to find the Servo Saver Body pt#75143. I've looked at speedtech, rcmart, rcmodel and stormer and can't find it. Does anyone know of any shops that have any or does anyone have an extra one they can sell me????
Thanks,
Thanks,
#4055
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
protc3 ygpm quetions for ya
#4056
is there going to be limited numbers of the hara scuri editions or is it just a spiecal edition?
#4057
Tech Addict
iTrader: (4)
Woo HOoo!!..
my Cyclone is on its way...
Is there anything i should pay particular attention to?
Any "must have" upgrades?
Eg. Alu outdrives, HD universals... narrow pulleys etc...
What's the first thing to wear out??
(I have a pro4 + spares so suspension isn't a problem)
Cheers!
my Cyclone is on its way...
Is there anything i should pay particular attention to?
Any "must have" upgrades?
Eg. Alu outdrives, HD universals... narrow pulleys etc...
What's the first thing to wear out??
(I have a pro4 + spares so suspension isn't a problem)
Cheers!
#4060
Just bought myself a Hara Edition Cyclone - gonna pick it up this weekend. Woohoo!
I can now have my current Cyclone set up for the wet. Bliss.
I can now have my current Cyclone set up for the wet. Bliss.
#4061
Tech Champion
iTrader: (9)
Originally Posted by Scott B
Hi guys I trying to find the Servo Saver Body pt#75143. I've looked at speedtech, rcmart, rcmodel and stormer and can't find it. Does anyone know of any shops that have any or does anyone have an extra one they can sell me????
Thanks,
Thanks,
don't see how it could break
scotty post some pics of the break...
maybe it's time for some preventative fix.. installing a
servo saver on the servo..
I know I had to install one when I had my Yok. BD.
#4063
I also broke one on my Pro 4 but this was my fault. I was tightening the screw down while the servo saver was sat slightly on the bottom bearing, so it just broke the threads off at the bottom.