Hi-LowBlow

iTrader: (1)

Check this out!!

http://www.hotbodiesonline.com/news/en/2009121402.html

Hebiki

iTrader: (26)

great win for Barry and the Hot Bodies team. His car looked great all weekend.

Ramyuras

Need a good setup for carpet rubber 17.5/13.5. The setup I am using is not working out for me my rear keep spinning out in tight corners.

ShaunMac

Post your setup here so everyone can see what you're currently running.

Andy's 2008 IIC set-up is a good place to start.

k_bojar

iTrader: (30)

there's a 2009 version of Andy's IIC setup that's good as well

that's what I used on mine last time i ran it on carpet

Ramyuras

I am using Andy's 2008 setup, where can I fine the 2009 setup?

BIG RE

iTrader: (33)

does anyone know the part numbers for the Tamiya springs on Andy's 08' IIC setup?

Tommy Bergfeldt

If it's the blue & white springs the kit is 53440.

thejo3

iTrader: (18)

What's the difference between the suspension mounts with 0, 1, 1.5, 2, 2.5 and 3 deg. ?
When should we use one more than another and which in front and rear ?

AGNO

Posts: 507
Trader Rating: 0

--------------------------------------------------------------------------------

Hi all,

First of all, I would like to BIG thank everyone for the great support. As you know, Barry did awesome job at the KO Grand Prix 2009. He was so strong and ridiculously fast all weekend!! The A-2 was really a show! Making a pass on Paul at the "S" section was just "WOW".

I'm very barry very happy with the result. Congratulations on your double TQing/winning Barry and thanks for all your efforts you have put on.

Finally, here are the Barry Baker's winning setup sheets that i think everyone is waiting for..

Thanks!

Sorry but I do not understand how it is measured droop

Hi-LowBlow

iTrader: (1)

Sorry AGNO, the droop measured from the setup board to the top of the axle. You can measure it with caliper or ruler.

Thanks,

Hi-LowBlow

iTrader: (1)

Here you go.

kriiiss

iTrader: (26)

hey guys I have :

(2)2.0 toe blocks
(1)2.5 toe block

I am looking to trade any of my toe blocks for a 1deg. toe block

even a .5 toe block if hpi or hb makes that

thanks I can ship today lmk

AGNO

Thank you!

Ramyuras

Thank you. This setup is for mod is it ok for 17.5?