1LikesXray T1FK05
03-27-2005, 05:22 PM
#1112
Tech Elite
iTrader: (4)
Join Date: Jun 2002
Location: RUBBERNECK RACING Columbus, Ohio
Posts: 2,484
Trader Rating: 4 (100%+)
Now that I have more Kydex I'll be sure you get you dialed in!!
03-27-2005, 05:33 PM
#1114
Tech Elite
iTrader: (4)
Join Date: Jun 2002
Location: RUBBERNECK RACING Columbus, Ohio
Posts: 2,484
Trader Rating: 4 (100%+)
Eric, YGPM
KE
KE
03-27-2005, 05:52 PM
#1115
Originally posted by Andy C
http://precisionracingsystems.com/browse I redid the link so it works now
http://precisionracingsystems.com/browse I redid the link so it works now
03-27-2005, 06:08 PM
#1116
Hey, Eric. Yeah, they included the hard 'H' arms that weren't previously available to the public. I saw 'em at the Nats--some of the other XRAY guys were running them on their FK04s. The nice thing about the team 'H' ones is they have the little 'shock' lip already dremeled down off the rear arm. Very trick looking.
Anyway, I was very happy to see/feel that as well. Can't wait until Jason sends out the new chassis to test out. (Hopefully in the next week or so.) The rigidity of the stock one is only fair, and my previous BMI 350 was stiff as a board.
Anyway, I was very happy to see/feel that as well. Can't wait until Jason sends out the new chassis to test out. (Hopefully in the next week or so.) The rigidity of the stock one is only fair, and my previous BMI 350 was stiff as a board.
03-27-2005, 06:15 PM
#1117
Tech Adept
prs spurs
Midnight. I ordered the touring ones.
03-27-2005, 06:33 PM
#1120
Tech Elite
iTrader: (4)
Join Date: Jun 2002
Location: RUBBERNECK RACING Columbus, Ohio
Posts: 2,484
Trader Rating: 4 (100%+)
Prolly once BMI has a kit out, I'll go for it...
03-27-2005, 06:34 PM
#1121
Originally posted by jdwca
Hey, Eric. Yeah, they included the hard 'H' arms that weren't previously available to the public. I saw 'em at the Nats--some of the other XRAY guys were running them on their FK04s. The nice thing about the team 'H' ones is they have the little 'shock' lip already dremeled down off the rear arm. Very trick looking.
Anyway, I was very happy to see/feel that as well. Can't wait until Jason sends out the new chassis to test out. (Hopefully in the next week or so.) The rigidity of the stock one is only fair, and my previous BMI 350 was stiff as a board.
Hey, Eric. Yeah, they included the hard 'H' arms that weren't previously available to the public. I saw 'em at the Nats--some of the other XRAY guys were running them on their FK04s. The nice thing about the team 'H' ones is they have the little 'shock' lip already dremeled down off the rear arm. Very trick looking.
Anyway, I was very happy to see/feel that as well. Can't wait until Jason sends out the new chassis to test out. (Hopefully in the next week or so.) The rigidity of the stock one is only fair, and my previous BMI 350 was stiff as a board.
My kits arms seemed rigid but still needed to have the standoff removed to on the rears to run 28mm foams...
Car went together like adream though...can't wait to hit the track wtih it...
03-27-2005, 06:36 PM
#1122
Re: prs spurs
Originally posted by Andy C
Midnight. I ordered the touring ones.
Midnight. I ordered the touring ones.
Any chance KT will get in some 116t RW spurs?
03-27-2005, 06:37 PM
#1123
Tech Adept
Re: spur gears
Originally posted by Andy C
precisionracingsystems.com Try this link for the spur gears I haven't used them but have 2 on order. These are the ones goop and a few other people with the fk05 have recomended
precisionracingsystems.com Try this link for the spur gears I haven't used them but have 2 on order. These are the ones goop and a few other people with the fk05 have recomended
Will Robinson Racing Gears fit the 05?
