3 racing new F1
#2329
#2331
Registered User
iTrader: (8)
Here we go here is my setup!
Front end
Ride - 5mm
Camber - 1.5*
Toe - 0
Caster- mounted far to back of car (think 9*)
Caster block 35g -1 (tie rod top arm mod)
2.5mm shims on bull studs on rear of caster plate for top arms
Springs- 3 racing soft medium
Weights above front wheels - approx 40g
tyres - hpi soft
Rear end
Ride - 6.5mm
Droop - 1mm above ride height
Camber - 2*
Toe - 3 degrees
Toe - 3*
Shock oil - 500wt much more oil
Shocks associated - 2 holes
Springs -pink medium
Diff oil - X-ray 1000cst
Sway bars - 1.3mm
Tyres - hpi medium
Electrics mounted through centre line of chassis using shorty packs.
Esc - Novak edge
Motor - reedy 21.5
Chassis - exotek
found this setup to be great and has excellent speed on corner exit. High speed corners eg sweeper, the car didn't hop,
Front end
Ride - 5mm
Camber - 1.5*
Toe - 0
Caster- mounted far to back of car (think 9*)
Caster block 35g -1 (tie rod top arm mod)
2.5mm shims on bull studs on rear of caster plate for top arms
Springs- 3 racing soft medium
Weights above front wheels - approx 40g
tyres - hpi soft
Rear end
Ride - 6.5mm
Droop - 1mm above ride height
Camber - 2*
Toe - 3 degrees
Toe - 3*
Shock oil - 500wt much more oil
Shocks associated - 2 holes
Springs -pink medium
Diff oil - X-ray 1000cst
Sway bars - 1.3mm
Tyres - hpi medium
Electrics mounted through centre line of chassis using shorty packs.
Esc - Novak edge
Motor - reedy 21.5
Chassis - exotek
found this setup to be great and has excellent speed on corner exit. High speed corners eg sweeper, the car didn't hop,
#2332
Tech Elite
iTrader: (3)
FGX kits are back in stock at TQ, and more hopups.
http://www.tqrcracing.com/shop/produ...t.asp?s_sort=3
FYI, Thanks.
http://www.tqrcracing.com/shop/produ...t.asp?s_sort=3
FYI, Thanks.
#2335
Tech Champion
iTrader: (34)