PRC Quad12
#242
Parma rear wheels have about the same offset as TRC's. I'm not sure why you would want to narrow the tire since that would give you less rubber on the track. Why don't you just space the hub out a bit?
#244
Tech Addict
iTrader: (3)
Originally posted by DPowell
We slipped to page 3. That is wrong.
D.P.
We slipped to page 3. That is wrong.
D.P.
Thats never good.
I've got the new chassis and preped the car for Cleveland. I'm going to do a couple of test runs next week just to work out ony bugs.
Now if my Schumacher parts would get here I could start testing the TC
#245
Tech Master
iTrader: (4)
Originally posted by odpurple
Parma rear wheels have about the same offset as TRC's. I'm not sure why you would want to narrow the tire since that would give you less rubber on the track. Why don't you just space the hub out a bit?
Parma rear wheels have about the same offset as TRC's. I'm not sure why you would want to narrow the tire since that would give you less rubber on the track. Why don't you just space the hub out a bit?
i did try spacing the rear out at first and after adding spacers to the left side to prevent rubbing ....i had to add to the spur gear side a few also to even it out and accelerate without it pulling to the side. when i drove it the rear of the car now seemed over planted, maybe due to the increased rear width? so i went back to the original width and cut the inside of my wheels to match
curious about the plastic Parma used? i switched from the other brands because their rims were more prone to chipping and cracking.
.
Last edited by fast-ho-cars; 11-13-2004 at 12:47 AM.
#246
adam maybe we can get doug to venture into the touring car world and make Mi2 chassis parts!
Hey doug sorry we let the thread go to the third page! I havent been posting much I just moved and got the DSL running.
I cant wait for cleveland , doug , adam , and I will be representing PRC at the race.
If there are any other quad 12 drivers attending the race let us know so we can get a get together on one of the nights and have a team dinner!
I have my car apart going over everything hopefully we can get a couple cars in the main for the team!
Hey doug sorry we let the thread go to the third page! I havent been posting much I just moved and got the DSL running.
I cant wait for cleveland , doug , adam , and I will be representing PRC at the race.
If there are any other quad 12 drivers attending the race let us know so we can get a get together on one of the nights and have a team dinner!
I have my car apart going over everything hopefully we can get a couple cars in the main for the team!
#248
I took the 12 scale apart and redid the front end the rear end was fresh already.
once I put a few packs through the car I will rebuild it before qualifiying!
PW is the best anyone that buys a schumacher will discover what real customer service is! Which is an atribute Doug has aswelll so who ever runs these two cars will enjoy a good product!
once I put a few packs through the car I will rebuild it before qualifiying!
PW is the best anyone that buys a schumacher will discover what real customer service is! Which is an atribute Doug has aswelll so who ever runs these two cars will enjoy a good product!
#249
ttt
#250
#252
Sleep............ in Cleveland??? Not sure we are attending the same race.... hehe.
Making run time? You running Modified in 12th scale Adam?
Making run time? You running Modified in 12th scale Adam?
#254
Well since i am driving up with Hector how can I not. See you this weekend.
Jeff
Jeff