Randy Caster

iTrader: (47)

Also, I am going to throw the titanium nitride coated pivot balls on both of my cars (good thing the web edition includes 8) But I am wondering what way the mark on the hex should be facing so that I get the stock toe in, and width.

Randy Caster

iTrader: (47)

Hmm, the link on the Alex USA site goes to the blank setup sheet, anyone know the correct URL for the Reedy setup?

RedBullFiXX

iTrader: (34)

Hi Randy
Here is the setup sheet from the RROC
I have learned some things since then, but this will get you close, we can discuss more Tuesday as I take on Mr Chinatown himself. (oh yeah Rod 2nd is ok...as long as I'm ahead of you

You see what I got to deal with That evo thread is so boring Rtype has to come over here to read something interesting

btw Steve is aware of the link problem on the setup sheet page, he has just been too busy lately.

RedBullFiXX

iTrader: (34)

Thanx for the heads up on those Bevel Gears Dave, I just looked through my spares and noticed the changes, I guess we do have the new gears over here now

Ko Racer

RedBull........ what changes have you made to your set-up from the reedy race ??? I tired it after it was posted on the alex site at a local event i didint run the spliff i had the one-way in it and sorex 36's on it but that was the only diff i made. and it was a hooked up day for me. please share

SpeedTech

iTrader: (5)

Hi Guys,

We'll fix the link problem on the setup sheet today.

Thanks for letting me know

Steve Wang

JDM_DOHC_SiR

iTrader: (31)

your welcome big guy

Randy Caster

iTrader: (47)

Thank You Dave, I'll start from there, but any info you can share you know I appreciate! I'm pretty confident I'll do good at Hitec, but your setup help never hurts

Randy Caster

iTrader: (47)

Thanks Steve, I sent you an email about the PAL systems, do you know when you'll have them in stock, my spur gears are begging me to buy one

rtypec

iTrader: (2)

That's right RBF...it's Mr. Chinatown to you haha. Or better yet, you can call me the Reedy Race Chump

We'll see what happens...it'll be fun regardless.

Did you watch the DVD's yet? Let me know in case you want me to bring more.

p.s. You have to click on the text above in case you didn't get the joke...haha some of us are slow like that.

Oasis

iTrader: (38)

I must be doing something wrong,My R2 sucks,went through 2 spur gears,its not any faster than my SD,oh well..

Randy Caster

iTrader: (47)

LOL, I dont know how you came up on that .wav Rod, but you get props from me even if you are on the dark side with Tamiya

RedBullFiXX

iTrader: (34)

Aluminum shaft holders with Robinson machined spur gears does the trick XXX.

What type of track/layout do you run on ?
Have you checked out the setups available on www.alexracingusa.com

We can get that R2 goin quick in no time

JDM_DOHC_SiR

iTrader: (31)

Yep Daves the man to help you out for the guys in the States

Oasis

iTrader: (38)

Small tight track,outdoors,asphalt.One question I do have is on the shocks,does the R2 need a stiff set up due to the location of the arm mounts ? right now I'm running 30wt all the way around and its like I'm using 100wt. I'm not sure what pistons are on the car(I bought the car used)What pistons should I be using?