Hobbywing ESC Settings ONLY
 

I have created this thread to allow users of the new Dynamic Timing ESC's to access / share each other’s settings. This is NOT intended to be an area for Argument or general Hobbywing questions those activities should be confined to here -------> http://www.rctech.net/forum/electric...-software.html

Later today I will add to THIS post a small setting sheet in PDF format that will allow you to record your settings without taking up too much space, once you have filled it in use the Print screen function, paste it into Paint and cut out all the edges etc and then post the picture on here. It is a simple process and will allow everybody to see how you have set up your Hobbywing ESC.

I will also over the next couple of days upload an updated 'how to' video on flashing / changing firmware as well as detailed instructions from Hobbywing. There will also be links to newer Firmware’s as and when they are released.

It is hoped that this thread becomes a 'resource' for users rather than a debating ground and once the sheets and video etc are posted I will ask for this POST to be stickied by Admins.

Please keep this thread within the 'spirit' for which it is intended, that of a place to share settings, without the complex arguments / wish lists. I will be asking the Admins to ensure that this thread is only used within the above parameters.

Good luck and Happy Hobbywinging

TC/Sedan Setup Sheet -----> http://www.mediafire.com/?pspi9b9fi6iq8p2

Pan Car Setup Sheet -----> http://www.mediafire.com/?50y7w4xgpssi86b

With this all you need do is fill it in, zoom to around 40%, print screen, paste into Paint, select just the form part of the image, copy, file - new, paste, save as. Takes seconds here is an example......

http://i97.photobucket.com/albums/l2...st/Example.jpg

Until I am able to place updated videos for Firmware Flashing etc I will leave the links to my original videos here these will be updated as soon as I find the time. These are still useful as they cover the initial flashing of firmware and basic settings, so I believe they are still relevant.

Part 1 ------> http://www.youtube.com/watch?v=bUKMoGvRJZY

Part 2 ------> http://www.youtube.com/watch?v=iOCFkCwBlrQ

They have had over 3,500 views so I would hope that they have helped some people.

Hobbywing Software V 1.63 (110310) (310) ------> http://www.hobbywing.com/upload/soft....63_110310.rar

Version 119 Instructions ------> http://www.hobbywing.com/upload/manu...e_20110125.pdf

Version 211/213 Instructions ------> http://www.hobbywing.com/upload/manu...K_firmware.pdf

Older USB Link Packages.

V1.63 (211) http://www.mediafire.com/download.php?p37b3yu3vamnodr

V1.3 (090313) -----> http://www.mediafire.com/?8w29x2omyg0ppdn

V1.5 (090817) -----> http://www.mediafire.com/?vs77kck23ukib2d

V1.62 (100520) -----> http://www.mediafire.com/?gix6mgnq4rtjv54

V1.62 (100608) -----> http://www.mediafire.com/?e03uk18b0k36wn1

V1.63 (1224) -----> http://www.mediafire.com/?k57g9oe8seaom72

SP V1.33 ------> http://www.mediafire.com/?0x6wbcu9evu19c2

HW (100410) -----> http://www.mediafire.com/?8hpybzd3p3sk2ls



Cherry
xx

Great job Cherry
A+

You RULE ! :cool:

Nice work :)

cherry check ur pm ..

Here's my settings for a 4.5t used last weekend...

Note it is stock software with a modified motor.. so be very careful on the boost settings!

To add to Cherry's above post, another method, and what I used above, is to install a pdf printer (bullzip is very good), and then print the setup sheets to PDF. Locks out the selection boxes :)

HiH
Ed

sharing my 1/12 set-up... appreciate inputs, suggestions from everybody. the motor is only warm to the touch but the ESC (no heatsink, no fan) is very hot.

Anyone have a good starting point for 1/12th 17.5 boosted? Using an SP GT 2.1 EX, HW 211 firmware, and SP V3 17.5 1 cell.

21.5 TC
 

21.5 TC setup, didn't get a chance to compare acceleration and top speeds with tekins as I checked out early in every run:D

Cherry you are smart person.

heres my setup from silverstone moto arena ..

anyone got any ideas to make it faster or to improve it feel free to post on here :D

http://i97.photobucket.com/albums/l2...oodooSetup.jpg

http://i97.photobucket.com/albums/l2...ackersetup.jpg

http://i97.photobucket.com/albums/l2...sMotosetup.jpg

Pan Car 1S, 1/12 17.5 Novak.

Run on a carpet medium grip, 20x10m track. Quite technical.

Thanks, looks like a good starting point for my new setup. One question: Why the 2.8V cutoff? Problems making time @3.0V?

No not at all. Using this setup I normally use 2300Mah per 8 minute run. I use a 5600 50C SMC. 2.8? I dont have any real reason, thats just where I set mine.

Cheers,
Shawn.

esc settings
 

fantastic, i will be looking forward to sharing information within this hobbywing thread, i race at aldershot hants, large tarmac track, thanks Cherry.

nice job Cherry :nod:

Have regional champs on Sunday will post mine soon after.

settings x11 13.5T touring rubber
 

hi guys, whats the best software to use on a lrp x11 13.5T motor running a touring car on asphalt on rubbers? large outdoor track. long straight. which software to use and with which settings? thx for help.

greets
a newbie

well i had also think about speed....
but i still cant take a high speed at high ways..can anyone help me?

hopefully this worked:

its for a small-ish outdoor track, 22m straight with a sweeper leading onto and off of it, and a number of hairpin corners

Have a look at my setup on page one on here . Its still needs
Work but cud b a good starting point ...

Anyone know how I can get hold of 213 as I cant see it on my software option. I downloaded the version straight from the Hobbywing site but like I say the newest it gives me is 211. I have also selected update in the drop down box at the top to update the software but it says I am running the current version so cant updated
I am happy with 211 but wanted to see the difference with the turbo between the two.
Also am I right in thinking 213 the turbo only comes in once all the boost is used up and it has also reached the delay specified ?
Thanks in advance for any help guys.:)

The 213 isnt out yet theres only a few that have it .
I asked cherry for it last sunday he wudnt let me have it :(

Ok mate cheers for the reply. So many talking about it I thought it was available.

Please don't stress too much about 213, it is just an evolution from 211, am guessing that it was possibly a particular drivers setting from TITC. Have run 213 and 211 can't see/feel any difference between the two. Stick with 211 until there is another official release version. I can keep blowing equipment up but most of you guys can't lol. Well unless you want to keep buying the ESC's :sneaky:;)

were can i download the 101244 fw ?
thanx

Look at FIRST POST

thanx, sorry i missed the first time around.

Need setup 1s Ballistic 13.5
 

Any suggestions for 1s 13.5. Track is about 70ft X 40ft technical. I have the 211 software and this will be my first race with it. Looking for good infield punch. This is in a 12th scale. Thanks for any help provided.

Setup of last niet for my crc gen x10 with 10.5t.
http://i51.tinypic.com/2n0sdwy.png

Hi, what software u use?

211Stock :)

:nod:

Your Timing And Boost settings are wrong Mark ! they add up to over 64 so they can't work properly ............

oops , i blame tom he changed it at moto, trev wat so i change it to?

It will work, but you just get to 64 degrees total, it is in the setup guide of the software ;)

barry i had no problems with it last week end , so ill keep running it, o my drrs is at 6 wud it be better to run it a bit higher? say 8 or 9?