Thanks, looks like a good starting point for my new setup. One question: Why the 2.8V cutoff? Problems making time @3.0V?

No not at all. Using this setup I normally use 2300Mah per 8 minute run. I use a 5600 50C SMC. 2.8? I dont have any real reason, thats just where I set mine.

Cheers,
Shawn.

esc settings
 

fantastic, i will be looking forward to sharing information within this hobbywing thread, i race at aldershot hants, large tarmac track, thanks Cherry.

nice job Cherry :nod:

Have regional champs on Sunday will post mine soon after.

settings x11 13.5T touring rubber
 

hi guys, whats the best software to use on a lrp x11 13.5T motor running a touring car on asphalt on rubbers? large outdoor track. long straight. which software to use and with which settings? thx for help.

greets
a newbie

well i had also think about speed....
but i still cant take a high speed at high ways..can anyone help me?

hopefully this worked:

its for a small-ish outdoor track, 22m straight with a sweeper leading onto and off of it, and a number of hairpin corners

Have a look at my setup on page one on here . Its still needs
Work but cud b a good starting point ...

Anyone know how I can get hold of 213 as I cant see it on my software option. I downloaded the version straight from the Hobbywing site but like I say the newest it gives me is 211. I have also selected update in the drop down box at the top to update the software but it says I am running the current version so cant updated
I am happy with 211 but wanted to see the difference with the turbo between the two.
Also am I right in thinking 213 the turbo only comes in once all the boost is used up and it has also reached the delay specified ?
Thanks in advance for any help guys.:)

The 213 isnt out yet theres only a few that have it .
I asked cherry for it last sunday he wudnt let me have it :(

Ok mate cheers for the reply. So many talking about it I thought it was available.

Please don't stress too much about 213, it is just an evolution from 211, am guessing that it was possibly a particular drivers setting from TITC. Have run 213 and 211 can't see/feel any difference between the two. Stick with 211 until there is another official release version. I can keep blowing equipment up but most of you guys can't lol. Well unless you want to keep buying the ESC's :sneaky:;)

were can i download the 101244 fw ?
thanx

Look at FIRST POST

thanx, sorry i missed the first time around.