Team Corally RDX Touring Car
01-25-2005, 02:02 PM
#616
Electro......... I posted that it was indeed 4 deg blocks after talking with Rob about it.
Cuffs..... what pistons did you have in that setup. We have an updated Setup Sheet on the website with spaces for different things now.
Jeff
Cuffs..... what pistons did you have in that setup. We have an updated Setup Sheet on the website with spaces for different things now.
Jeff
01-25-2005, 02:23 PM
#618
Tech Elite
iTrader: (4)
Join Date: Jun 2002
Location: RUBBERNECK RACING Columbus, Ohio
Posts: 2,484
Trader Rating: 4 (100%+)
Originally posted by rayhuang
YAYOO!! Now I drive the same car as some of my EA Motorsports Brethren!!! Or is that Brotherin.
I am looking forward to it. I also ordered an entire hobbyshop walls worth of spares. I guess I could have called Bio and seen if they already had them on the wall att the track
Ray
YAYOO!! Now I drive the same car as some of my EA Motorsports Brethren!!! Or is that Brotherin.
I am looking forward to it. I also ordered an entire hobbyshop walls worth of spares. I guess I could have called Bio and seen if they already had them on the wall att the track
Ray
See ya,
Kevin
Last edited by wannabee; 01-25-2005 at 02:41 PM.
01-25-2005, 03:08 PM
#619
Wannabee, Awesome..
Ron, Nice job dude....... Looks promising for you.
Cuffinator, Got the e-mail. Thanks dude.
Ron, Nice job dude....... Looks promising for you.
Cuffinator, Got the e-mail. Thanks dude.
01-25-2005, 07:23 PM
#622
I would like to Congratulate Ben Griffin for WINNING stock touring car at Race 1 of the Florida State Series. This was held this past weekend at Speedline Hobbies in Tampa. Which happens to be the site of the 2005 ROAR Asphalt Nationals.
Expect to see a lot of track time at this place between now and October.
Jeff
Expect to see a lot of track time at this place between now and October.
Jeff
01-25-2005, 07:51 PM
#624
Well.......... I would mount it in the center of the front wheel if i could get it straight. Lately all the bodies have been back mounted. With the front end being shorter.
Jeff
Jeff
01-25-2005, 08:19 PM
#625
RDX and spares
I have been looking at the RDX and wanted to know if I should wait for the carpet kit to come out or just bite the bullet and get one now?
Also, what spares or hopups would be suggested to run carpet foams and then outdoor with rubber tires?
Lastly, the best place to purchase the car?
Thanks, Mike
Also, what spares or hopups would be suggested to run carpet foams and then outdoor with rubber tires?
Lastly, the best place to purchase the car?
Thanks, Mike
01-25-2005, 09:06 PM
#626
Mike-well-if my digging aroound for info is correct:
UK kit 2.9 chassis and front diff and 4 caster blocks
US kit 2.9 chassis and front one-way and 2 caster blocks.
Carpet edition kit 3.5 chassis and frnt diff and 4 caster blocks.
Sounds like anyone of the above (US and UK kits sounds a little better) will work for you because your gonna be buying a diff or a one-way and different caster block for tuning options anyways. I bought the US kit today and ordered the 75% graphite arms and 4 degree caster blocks, 0.5 and 1mm shims for toe in and arm sweep and narrow rear hexes. I also ordered the 1.3mm shock pistons and the hard spring set (6-pairs frm 26 to 42 lbs I think). Remember-you need to order dfferent bearing cups and bearings to switch from the one-way to the Diff. They have different size outdrives I gather.
You can buy the US and UK spec kits in the USA, but the Carpet edition is still a couple weeks out I hear.
Superior Hobbies is the Corally Importer so they are your first bet. But I thnk someone told me that you can get them from Stormer as well?
Ray
UK kit 2.9 chassis and front diff and 4 caster blocks
US kit 2.9 chassis and front one-way and 2 caster blocks.
Carpet edition kit 3.5 chassis and frnt diff and 4 caster blocks.
Sounds like anyone of the above (US and UK kits sounds a little better) will work for you because your gonna be buying a diff or a one-way and different caster block for tuning options anyways. I bought the US kit today and ordered the 75% graphite arms and 4 degree caster blocks, 0.5 and 1mm shims for toe in and arm sweep and narrow rear hexes. I also ordered the 1.3mm shock pistons and the hard spring set (6-pairs frm 26 to 42 lbs I think). Remember-you need to order dfferent bearing cups and bearings to switch from the one-way to the Diff. They have different size outdrives I gather.
You can buy the US and UK spec kits in the USA, but the Carpet edition is still a couple weeks out I hear.
Superior Hobbies is the Corally Importer so they are your first bet. But I thnk someone told me that you can get them from Stormer as well?
Ray
Last edited by rayhuang; 01-25-2005 at 09:14 PM.
01-25-2005, 09:11 PM
#627
Well.......... Ray yer good.
Last edited by Jeff Brown; 01-25-2005 at 10:03 PM.
01-25-2005, 09:18 PM
#628
jeff- didnt you guys say the same thing?
did you get the email I sent you today? Make sure Robby handles that.
did you get the email I sent you today? Make sure Robby handles that.
01-25-2005, 10:04 PM
#629
Stop testing me TJ so late in the night......
I got yer emails......... I'll talk to rob tomorrow.
Jeff
I got yer emails......... I'll talk to rob tomorrow.
Jeff
01-25-2005, 10:23 PM
#630
Originally posted by rayhuang
Mike-well-if my digging aroound for info is correct:
UK kit 2.9 chassis and front diff and 4 caster blocks
US kit 2.9 chassis and front one-way and 2 caster blocks.
Carpet edition kit 3.5 chassis and frnt diff and 4 caster blocks.
Sounds like anyone of the above (US and UK kits sounds a little better) will work for you because your gonna be buying a diff or a one-way and different caster block for tuning options anyways. I bought the US kit today and ordered the 75% graphite arms and 4 degree caster blocks, 0.5 and 1mm shims for toe in and arm sweep and narrow rear hexes. I also ordered the 1.3mm shock pistons and the hard spring set (6-pairs frm 26 to 42 lbs I think). Remember-you need to order dfferent bearing cups and bearings to switch from the one-way to the Diff. They have different size outdrives I gather.
You can buy the US and UK spec kits in the USA, but the Carpet edition is still a couple weeks out I hear.
Superior Hobbies is the Corally Importer so they are your first bet. But I thnk someone told me that you can get them from Stormer as well?
Ray
Mike-well-if my digging aroound for info is correct:
UK kit 2.9 chassis and front diff and 4 caster blocks
US kit 2.9 chassis and front one-way and 2 caster blocks.
Carpet edition kit 3.5 chassis and frnt diff and 4 caster blocks.
Sounds like anyone of the above (US and UK kits sounds a little better) will work for you because your gonna be buying a diff or a one-way and different caster block for tuning options anyways. I bought the US kit today and ordered the 75% graphite arms and 4 degree caster blocks, 0.5 and 1mm shims for toe in and arm sweep and narrow rear hexes. I also ordered the 1.3mm shock pistons and the hard spring set (6-pairs frm 26 to 42 lbs I think). Remember-you need to order dfferent bearing cups and bearings to switch from the one-way to the Diff. They have different size outdrives I gather.
You can buy the US and UK spec kits in the USA, but the Carpet edition is still a couple weeks out I hear.
Superior Hobbies is the Corally Importer so they are your first bet. But I thnk someone told me that you can get them from Stormer as well?
Ray
I appreciate all of the info...now what about the part #'s....J/K
You know looking at the pictures of the new Xray FK05 it looks very similar to the RDX, but I wonder if it performs as well.
Thanks again, Mike