RCAmerica/Xray,Hudy
#122
#123
Tech Addict
iTrader: (17)
Xray Challange's
Guys were are looking at doing alot more Xray Challange's in 2011. If you have a track and want us to come race there with you. Please give me some info. We are trying to get this all setup for next year.
We are looking for 2 tracks in the Midwest, 2 tracks on Westcoast and 2 tracks on Eastcoast.
Any info would be great.
You can run any car in the race. This is not only for Xray's but anybody. The whole idea is to promote racing as a whole.
Let me know.
Thanks Drew
Guys were are looking at doing alot more Xray Challange's in 2011. If you have a track and want us to come race there with you. Please give me some info. We are trying to get this all setup for next year.
We are looking for 2 tracks in the Midwest, 2 tracks on Westcoast and 2 tracks on Eastcoast.
Any info would be great.
You can run any car in the race. This is not only for Xray's but anybody. The whole idea is to promote racing as a whole.
Let me know.
Thanks Drew
... and thanks for the rear belt the other day @ the KO.
-Martin
#124
Suspended
#126
Alright guys I am back from the KO race. What a great race. Danny and his crew are great. The track is by far one of the best we have. The place is the cleanest track that has a indoor offroad and onroad that I have been to. If you have not been there plan a trip.
This was are first time running the new car on asphalt and it was good. Paul was on fire with his T3'11.
Thanks Drew
This was are first time running the new car on asphalt and it was good. Paul was on fire with his T3'11.
Thanks Drew
#127
Tech Elite
iTrader: (3)
Xray Challange's
Guys were are looking at doing alot more Xray Challange's in 2011. If you have a track and want us to come race there with you. Please give me some info. We are trying to get this all setup for next year.
We are looking for 2 tracks in the Midwest, 2 tracks on Westcoast and 2 tracks on Eastcoast.
Any info would be great.
You can run any car in the race. This is not only for Xray's but anybody. The whole idea is to promote racing as a whole.
Let me know.
Thanks Drew
Guys were are looking at doing alot more Xray Challange's in 2011. If you have a track and want us to come race there with you. Please give me some info. We are trying to get this all setup for next year.
We are looking for 2 tracks in the Midwest, 2 tracks on Westcoast and 2 tracks on Eastcoast.
Any info would be great.
You can run any car in the race. This is not only for Xray's but anybody. The whole idea is to promote racing as a whole.
Let me know.
Thanks Drew
I'd like to host the 2011 Xray Challenge.
We are located in Chino CA.
90'X45' track size indoor carpet onroad track.
Please checkout the link www.tqrcracing.com for more information
Here is the recent pictures and video from the track.
+ YouTube Video | |
#129
#130
Tech Master
iTrader: (2)
Parts - T3 vs. T3 '11
From the Parts Cross Reference Table on XRay's site ...
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
#131
From the Parts Cross Reference Table on XRay's site ...
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
#133
From the Parts Cross Reference Table on XRay's site ...
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
Only 2 3x6x2.5 bearings for the T3/T2 single post steering, 2 3x6x2.5 bearings PER post on the T3'11 dual steering system.
#134
Tech Champion
iTrader: (38)
Drew, re: xray t3 '2010 thread
I think the issue is that some people don't associate Xray to RCAmerica and the forum is international so RCAmerica is even more so not associated with Xray.
Just a head's up. I know for the longest time I had no idea they were associated.
Just a head's up. I know for the longest time I had no idea they were associated.
#135
From the Parts Cross Reference Table on XRay's site ...
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
It looks like the T3'11 has 2 more bearings than the T3
30 9000 T2, T3 SET OF HIGH-SPEED BALL BEARINGS (18)
30 9001 T3'11 SET OF HIGH-SPEED BALL BEARINGS (20)
Further down the chart it appear that the following are also standard on the T3'11
93 0306 BALL-BEARING 3x6x2.5 (2)
Are these seperate from the set mentioned above? Meaning are these the 2 additional bearings or does this actually make 4 additional?
Thanks Drew