Jack2

iTrader: (1)

I have a dremel, and a motor mount Ed. What should I do

Smartypants

Any pictures of the cut mount?

crabboy

iTrader: (58)

Not sure about the more traction thing, from what i read most cars were traction rolling

Rhys

Sean Williams

iTrader: (20)

cut it where and how?

TryHard

iTrader: (4)

Like this...

Basically gives a little more rear traction. The traction rolling was mostly an issue during practise, where the initial bite was super high, mostly because of having 15-20 cars running around solidly all day...

Nilks

Any partnumbers for the split blocks and the titanium turnbuckles?

Owen RaCing

iTrader: (17)

Do the split blocks change flex characteristics? If so, is it significant?

Jack2

iTrader: (1)

well a new mount is only $54 from RCMarket, Cue the dremel!

Geppetto

iTrader: (35)

Whoa... why not just install the split suspension mounting blocks? Wouldn't that render the same or similar results?

Jack2

iTrader: (1)

well I couldnt resist, I had to pull my mount out and and cut it, and after fitting the car back up, when I "flex" the car, you can see there is a fair amount of movement between the now "2 peice" mount. Got a new mount on the way also, hoping to try the them back to back sometime soon.

syndr0me

iTrader: (32)

I miss my 416.

cyclone speed

Hello again

I received my parts which I ordered a week back, installed them on the car and im just waiting for the 46mm steel bones.
While rebuilding everything, i re-checked a few things, first off : I know people say you must have abit of play around the wishbones, hubs etc ... but i had a look around the whole chassis and in some place i get 0,3mm of play, and some others 0,6mm of play.
So the amount of play on my car is between 0,3 - 0,6 mm. Is this too much ?
Should i try to minimise it ? Btw, if I have 0,3mm on the left side, i have 0,3mm on the right side too, this aplys to everywhere on the chassis ( wishbone, hubs ...)

Thank you

Kody

iTrader: (9)

??? Please explain???

Turillo

iTrader: (12)

I love my 416WE; have two of them and selling one if anyone is interested.

Been eyeing the 417, but havent pulled the trigger......yet

geeunit1014

iTrader: (14)

Trade you