R/C Tech Forums
Page 133 of 695
« First
33
83
123
131
132
133
134
135
143
183
233
633
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Team Associated TC6 Thread (https://www.rctech.net/forum/electric-road/414655-team-associated-tc6-thread.html)

FrankH 03-09-2011 10:43 AM
Originally Posted by f1o7x9 (Post 8773588)
What would be the best gear diff that I can buy for my Tc6
Yokomo BD5 Gear Diff !!!!!!!!

zaranza 03-09-2011 04:31 PM
my tc6
 
Today I finished assembling my chassis tc6. basically I had problems with long links. Here we were with tire rubber in asphalt for high adhesion.

gpm-parts.com 03-09-2011 09:41 PM
top sercet light weight hollow c hub, lol
 
I was driving my TC6 at the track last night. When replacing a broken c hub I found there are two big empty holes inside the plastic where the c hub snap...... I mean these thing do break but I don't expect to see some holes inside the plastic..... Don't get me wrong as I still love my TC6 but I am not sure what AE is doing........

jorgesimes 03-10-2011 02:12 AM
Originally Posted by zaranza (Post 8775415)
Today I finished assembling my chassis tc6. basically I had problems with long links. Here we were with tire rubber in asphalt for high adhesion.
The stock turnbuckles are meant to use on the 7 camber link position, to use the other positions i think you have to buy these ones FT Blue Titanium Turnbuckles, 1.375"/35mm

Hope this helps.

rosko 03-10-2011 03:28 AM
Any updates on an associated gear diff.

RC-ProSpeed 03-10-2011 05:51 AM
Does associated makes a Front Solid Axel for the TC6? if not, any other brand that will fit in?

Thanks!

hacker 03-10-2011 05:53 AM
doesn't it already have a spool?

I wouldn't know, I don't have a car yet

wtcc 03-10-2011 05:58 AM
Originally Posted by RC-ProSpeed (Post 8778376)
Does associated makes a Front Solid Axel for the TC6? if not, any other brand that will fit in?

Thanks!
It comes with a slipper spool.
Who wants a solid axle (that kills the blades if you crash) can get it from Litemodz for example.

cheehtae 03-10-2011 06:28 AM
Originally Posted by rosko (Post 8778043)
Any updates on an associated gear diff.
+1, sup brandon? greetz from lexington.

rosko 03-10-2011 06:31 AM
Ran a regular spool on my tc5, even if I just barely tap I broke a blade, then when you realize you broke one and pull your car off the track you usually tore up an outdrive to.

RC-ProSpeed 03-10-2011 06:47 AM
Originally Posted by wtcc (Post 8778409)
It comes with a slipper spool.
Who wants a solid axle (that kills the blades if you crash) can get it from Litemodz for example.

Hope I wont crash that much!:D I never use a slipper spool before... does it come loose after a while??
Thanks for the info on the Litemodz, I found that it is designed to not use the plastic blades, so the problem of the broken blades is a no worry... the questions is who sells them in the USA?

Warren Weaver 03-10-2011 06:54 AM
Originally Posted by RC-ProSpeed (Post 8778641)
Hope I wont crash that much!:D I never use a slipper spool before... does it come loose after a while??
Thanks for the info on the Litemodz, I found that it is designed to not use the plastic blades, so the problem of the broken blades is a no worry... the questions is who sells them in the USA?
contact me iam the usa distributor of litemodz

RC-ProSpeed 03-10-2011 07:02 AM
Will do... Thanks!

pcar951 03-10-2011 07:11 AM
Originally Posted by RC-ProSpeed (Post 8778641)
Hope I wont crash that much!:D I never use a slipper spool before... does it come loose after a while??
Thanks for the info on the Litemodz, I found that it is designed to not use the plastic blades, so the problem of the broken blades is a no worry... the questions is who sells them in the USA?
The TC6 spool doesn't come lose if you build as per the instructions. The slipper spool is an absolute stroke of genius from Associated, it's one of those little things that makes a huge difference.

M.Abramowicz 03-10-2011 07:12 AM
heh ;)

I found next bug ;)

part 31214 it is Caster Block Bushing

one has 4.49mm diameter and 3x has 4.41mm ;)

so I found slop at front ;)

4.49mm is tight, and fit caster block nice :) 4.41 has slop :(


All times are GMT -7. It is currently 05:38 AM.
Page 133 of 695
« First
33
83
123
131
132
133
134
135
143
183
233
633
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.