|
Has anyone mounted a ZR Bwoah on an XRAY T4'21? Just eyeballing it, I'm not sure the rear body mounts will go low enough? Just curious what others have done before making some holes.
|
Originally Posted by bentouttashape
(Post 15943414)
Has anyone mounted a ZR Bwoah on an XRAY T4'21? Just eyeballing it, I'm not sure the rear body mounts will go low enough? Just curious what others have done before making some holes.
|
Originally Posted by Ivan Dickson
(Post 15943475)
Yes, just need to use ultra low shock towers.
|
I thought the T4'21 came with ultra low shock towers. I had no problem mounting the BWOAH! on my T4'21 as well as X4.
|
Perhaps Ivan is referring to the "Lower" ULP?
https://cimg7.ibsrv.net/gimg/www.rct...65b5f0f701.png It appears that there are two ULP tower options:I believe it moves both the shock and body post holes down by 4mm? Henry, do you have any pictures of your BWOAH mounted up to your T4'21? Both with and without the body? |
Originally Posted by bentouttashape
(Post 15943414)
Has anyone mounted a ZR Bwoah on an XRAY T4'21? Just eyeballing it, I'm not sure the rear body mounts will go low enough? Just curious what others have done before making some holes.
https://www.rctech.net/forum/showpos...ostcount=10375 |
Not sure what this photo would tell you. It is mounted on a box stock T4'21 in this picture. I used horizontal body posts for mounting the rear. Otherwise the rear vertical body posts will be right next to the rear wing.
https://cimg3.ibsrv.net/gimg/www.rct...c232ae492b.jpg |
Originally Posted by HenryC
(Post 15943842)
Not sure what this photo would tell you.
|
Originally Posted by bentouttashape
(Post 15943685)
Perhaps Ivan is referring to the "Lower" ULP?
https://cimg7.ibsrv.net/gimg/www.rct...65b5f0f701.png It appears that there are two ULP tower options:I believe it moves both the shock and body post holes down by 4mm? Henry, do you have any pictures of your BWOAH mounted up to your T4'21? Both with and without the body? |
Originally Posted by bentouttashape
(Post 15943617)
Front and rear or just in the rear?
|
Thanks for the advice, Ivan/Henry.
|
Originally Posted by Raman
(Post 15900658)
Slightly exaggerated rear fender, used to have mould line on back 😉
https://cimg4.ibsrv.net/gimg/www.rct...29a77aabc.jpeg https://cimg9.ibsrv.net/gimg/www.rct...95acb93f6.jpeg Looks good btw |
Originally Posted by rob martin
(Post 15948139)
Are the ride usgt tires/wheels legal
Looks good btw |
Originally Posted by Raman
(Post 15948175)
Seems they have been made legal for indoor / carpet
Tire & Wheel Specifications: Tires- CARPET p/n GRC123 (GRAY wheels) set of 4 available through Gravity RC http://www.teamgravityrc.com/ to dealers and retail ASPHALT/OUTDOOR SURFACES Mounted - GRC123, GRC124, GRC124GTB, GRC124GTW Unmounted tire - GRC125 Grinding of tire tread is NOT permitted. Sanding of mold seam to remove seam is allowed MUST USE INCLUDED INSERTS Wheels- Any 24mm - 26mm spoke (non-dish) type wheel |
| All times are GMT -7. It is currently 05:51 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.