![]() |
Originally Posted by bronc4now
(Post 11255710)
My new body Audi R8 hope it fits the bill ..
http://i1175.photobucket.com/albums/...w/IMAG0407.jpg |
Originally Posted by JCarr
(Post 11284578)
Very nice, what chassis is that on? I am looking at getting this body for my 416, but was worried the front would be too low for the shock tower. Thanks for any info you can give.
if its made to fit a TT01 (which it is), it'll fit any of the other 'stand up' front shock cars :D |
Going to run my Stiletto body for a while in USGT. Its a low boy, but everything still fits underneath. The body is 200mm, so the wheels are tucked under a bit. Could add some spacers but, being tucked under is not necessarily a bad thing. The fronts are about even on this body.
http://www.rctech.net/forum/attachme...6stiletto1.jpg |
Originally Posted by IndyHobbies.com
(Post 11285834)
Going to run my Stiletto body for a while in USGT. Its a low boy, but everything still fits underneath. The body is 200mm, so the wheels are tucked under a bit. Could add some spacers but, being tucked under is not necessarily a bad thing. The fronts are about even on this body.
http://www.rctech.net/forum/attachme...6stiletto1.jpg |
Originally Posted by k_bojar
(Post 11285675)
it'll fit...One of the guys I race with ran it on his 416x at the Jackson, NJ TCS race this summer :)
if its made to fit a TT01 (which it is), it'll fit any of the other 'stand up' front shock cars :D different. :sneaky: Did you notice how it seemed to handle with that pretty flat wing on the back? It looks like it it should be pretty light on rear downforce. |
Originally Posted by JCarr
(Post 11285894)
Thanks for the info, I really want to try this body, just to be
different. :sneaky: Did you notice how it seemed to handle with that pretty flat wing on the back? It looks like it it should be pretty light on rear downforce. I know my team for the New Jersey 24 hour race ran the body - sadly I wasn't able to make it...but I think they were pretty happy with how it handled throughout 24 hours of racing..granted they were running TT01's with silver can motors - but it was still 6 months of racing in 24 hours :lol: |
Originally Posted by k_bojar
(Post 11285882)
very nice...i'm assuming you're running a IFS chassis under there?
|
Originally Posted by IndyHobbies.com
(Post 11285999)
That chassis is a Michael Jones TC6!
|
Originally Posted by k_bojar
(Post 11285969)
he's car looked pretty good - running GT1..
I know my team for the New Jersey 24 hour race ran the body - sadly I wasn't able to make it...but I think they were pretty happy with how it handled throughout 24 hours of racing..granted they were running TT01's with silver can motors - but it was still 6 months of racing in 24 hours :lol: |
Here is my entry into USGT. First race will be Sunday.
http://i5.photobucket.com/albums/y18...pscfb32e8c.jpg |
|
Originally Posted by iadevil
(Post 11287131)
Here is my entry into USGT. First race will be Sunday.
http://i5.photobucket.com/albums/y18...pscfb32e8c.jpg |
USGT
Hi, Attached photo of my two USGT entries for this year. Regards
Norman2 |
Here is my buddy's Integra and my Audi from the TCS race here in Seattle.
The Audi body worked well, and looked good enough for a concourse win. :nod: We have a good mix of VTA and USGT cars here in Seattle under our "Scale Spec" class, though we all run the silver can or 25.5 BL. Fun for all though for sure. I love the realism. :tire: |
Originally Posted by Jonesy112
(Post 11288826)
What track do you run at in Iowa? I'm always looking to run some when I'm back over the holidays
|
| All times are GMT -7. It is currently 05:36 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.