Tamiya TA05 - VDF
#76
join the movement on FB! VDF forever.
#78
Bringing this thread back to life...
Just got my Gold VDF yesterday. Funny how the a few minutes before I ordered it I was set on getting the new VDS. Anyone know if a gold oneway exists?
Just got my Gold VDF yesterday. Funny how the a few minutes before I ordered it I was set on getting the new VDS. Anyone know if a gold oneway exists?
#79
Tech Fanatic
iTrader: (32)
#80
Tech Master
iTrader: (28)
if using the front oneway it'll be covered by plastic bulkhead anyway.
(if using clear blue or alloy bulkhead then yeah your underwear is showing)
centre oneway can find TA05v2 black ltd version with 18T
but you need to find a way of securing the pulley & the fixed pulley.
Square makes a aftermarket layshaft for VDF that accepts grubscrew pulleys.
#81
Tech Champion
iTrader: (48)
No gold one-way but here is Squares line up of gold freshness for the VDF!!!
http://banzaihobby.com/index.php?mai...7793b69f3944ea
http://banzaihobby.com/index.php?mai...7793b69f3944ea
#82
Tech Fanatic
iTrader: (32)
No gold one-way but here is Squares line up of gold freshness for the VDF!!!
http://banzaihobby.com/index.php?mai...7793b69f3944ea
http://banzaihobby.com/index.php?mai...7793b69f3944ea
#84
Anyone have any idea where I can find either the Eagle Racing or Active CS pulley set for this magical beast? I'm surprised eBay comes up with nothing. Every other place seems to be out of stock.
My buddy got his VDF together before mine and damn this thing is silky! Granted I don't have much experience with this but compared with what I have driven so far, the VDF is the loveliest.
My buddy got his VDF together before mine and damn this thing is silky! Granted I don't have much experience with this but compared with what I have driven so far, the VDF is the loveliest.
#85
Roughly 85% there. Sex-ehhhh
Was going to install an Epic 17.5 BL but wondering if it's not enough.
Was going to install an Epic 17.5 BL but wondering if it's not enough.
#86
Those kits overdrive the rear too much and the internal ratio wont allow you to achieve good gearing for anything hotter than 13.5. 20t center pulley and 32t rear pulley seems to be about the limit for rear axle, for decent gearing.
#88
I'm new to this so is there any outright advantage to running a hot mod motor for drifting? I've installed a 17.5 anyway but is it enough?
#89
anybody cs their vdf? what did you use?
#90
For countersteer setups, you really don't need anything hotter than 10.5. Much of the action happens with low throttle. 17.5 will work, but if you're new to drifting, you may think it's too slow. IMO slow looks better and more scale.