Originally Posted by JayL
(Post 7469439)
I am worried it uses the same suspension parts....
I see cyclone knuckles break every race day, many also I see many cyclone parts where the left is 1 degree and the right is .5 degrees, not accurate |
the plastic parts from HPI are very good quality i reckon. more durable than Tamiya yet still have fairly good flex and less wear.
|
Originally Posted by Tony Vega
(Post 7470592)
Had the TCX in my hands thanks to Hiro from HB who is at the Reedy Race. Very nice indeed. I'll be waiting patiently for one.
|
should be end of june or early july...hopefully.
|
Originally Posted by Kiznasty
(Post 7471883)
should be end of june or early july...hopefully.
|
Yeah, it seems to be longer than expected... ...We cannot do anything anyway so, let's try to be patient.
I confirm there's a slight toe-in angle difference on the Cyclone rear hub. You can meet 0.5°/1° difference from left to right because the pin in the molding tool is not 100% normal to the wheel axis. But you can get things ok using the right reamer on both hubs. Then the pressure socket screw on the suspension shaft will put everything in the right alignment. Or you can choose the purple anodised alu hub too. But mind the suspension flex... |
"I confirm there's a slight toe-in angle difference on the Cyclone rear hub."
That has always been a problem since day one. Most of us use the aluminum set to take away the slight toe angle. I hope they solve this with the TCX. |
Originally Posted by JoeyE
(Post 7473561)
I was hanging out at the REEDY Race today and the HB crew said it will not be released until the end of August 2010.
Originally Posted by JoeyE
(Post 7473892)
Most of us use the aluminum set to take away the slight toe angle.
|
Originally Posted by slakr
(Post 7474211)
I see the Aluminum Rear Hub Carriers in 0° & 1°... what degree are the stock kit pieces?
|
Originally Posted by k_bojar
(Post 7474264)
zero is stock on the other Cyclones - don't know why they'd change it here, considering toe-in is really adjusted by the suspension parts, not in the rear hubs
http://www.rctech.net/forum/6123156-post17030.html |
Originally Posted by cosmo1974
(Post 7474270)
Korey has an explanation of inboard and outboard rear toe here:
http://www.rctech.net/forum/6123156-post17030.html I should have clarified my statement by saying that its limited toe-in adjustment in the hubs - the major adjustments are handled via the suspension blocks :) its all good :) |
Yes, my specific question was what degree are the stock pieces... thanks K.
The explanation by Korey was good info too... thanks for that cosmo. |
Is there a release Date for the TCx
Or should we be waiting till after the World's before release? |
I heard "End of July" but other people heard "End of August" during the Reedy race... So after the Worlds for sure.
|
Originally Posted by Slideaway
(Post 7490796)
I heard "End of July" but other people heard "End of August" during the Reedy race... So after the Worlds for sure.
|
All times are GMT -7. It is currently 03:23 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.