Tamiya TB-Evolution IV
#961
Tech Champion
iTrader: (31)
Originally posted by KilRuf
Question for you guys, am I gonna have to clip off an ear on the servo for the Evo IV? I'm just trying to decide which servo to toss in mine when it arrives. One of my s9550 already clipped from my Evo III... and the newer one is in my 415.
Question for you guys, am I gonna have to clip off an ear on the servo for the Evo IV? I'm just trying to decide which servo to toss in mine when it arrives. One of my s9550 already clipped from my Evo III... and the newer one is in my 415.
I would only use the 9550 is you want any form of space inyour EVO4....
and as far as I know ...I"think" that Square is working on some Alloy ones now... not for sure
-Dave
#962
Originally posted by taisantobi
does anyone know wich plastic prop joint from other tamiya cars fit on the evo iv? mine broke today, and i have a race on sunday, so there's now time left to order in japan..... :-(
tobi
does anyone know wich plastic prop joint from other tamiya cars fit on the evo iv? mine broke today, and i have a race on sunday, so there's now time left to order in japan..... :-(
tobi
#964
Originally posted by John Doucakis
Any gear striping problems in the EVO 4?
Any gear striping problems in the EVO 4?
#965
Originally posted by EVOtech
You might get somewhere with a TT-01 cup, but you'd have to drill it, like the yoke one.
You might get somewhere with a TT-01 cup, but you'd have to drill it, like the yoke one.
yeah the yok one will work but its a hard thing to get to fit. Bugger of a part to replace
I've stripped a spur gear, but was expected after a massive accident.
#966
i will try to fit the yokomo cup today...... i'll tell you my experiences....
another point: i have lots of play in the rear uprights, is that normal? i tried to shimm it out, but i had no chance........ i think the play is between the suspension arms and the uprights. any suggestions?
thank you
tobi
another point: i have lots of play in the rear uprights, is that normal? i tried to shimm it out, but i had no chance........ i think the play is between the suspension arms and the uprights. any suggestions?
thank you
tobi
#967
Anyone tried to fit a Pro4 one? they now make an alloy one for the Pro4 So i wonder if they have a similar problem
#968
how about drivecup from the SD?
#969
Well, not really appropriate for this thread, but I just bought a Robitronic ETC V1 chassis.
If the EVO4 doesn't eat XRays, then the ETC V1 should. It's scored wins at BRCT nationals???
If the EVO4 doesn't eat XRays, then the ETC V1 should. It's scored wins at BRCT nationals???
#970
Originally posted by racer
how about drivecup from the SD?
how about drivecup from the SD?
#971
Originally posted by EVOtech
Well, not really appropriate for this thread, but I just bought a Robitronic ETC V1 chassis.
If the EVO4 doesn't eat XRays, then the ETC V1 should. It's scored wins at BRCT nationals???
Well, not really appropriate for this thread, but I just bought a Robitronic ETC V1 chassis.
If the EVO4 doesn't eat XRays, then the ETC V1 should. It's scored wins at BRCT nationals???
#972
Originally posted by V12
I have seen this ETC V1 here and be sure it wonīt eat Xrays or EVPīs or TC3īs or anything like these. The ETC is based on the ball type suspension from Hong Nor and thatīs the problem. The drivetrain seems to be very good but not the suspension. The TC4 International Pro2 from GM Racing/Hong Nor was the same car beside drivetrain and chassis layout and was the worst car I ever had.
I have seen this ETC V1 here and be sure it wonīt eat Xrays or EVPīs or TC3īs or anything like these. The ETC is based on the ball type suspension from Hong Nor and thatīs the problem. The drivetrain seems to be very good but not the suspension. The TC4 International Pro2 from GM Racing/Hong Nor was the same car beside drivetrain and chassis layout and was the worst car I ever had.
I know for a fact that it has scored very highly over here in club and national races. I have seen the results.
From the spec, it is a VERY advanced chassis. If the suspension doesn't work, then a) it wouldn't sell, and b) it wouldn't score in races, beating Xrays and Tc3's (doh!)
I wouldn't have bought it if I hadn't already seen the evidence.
#973
Tech Initiate
Originally posted by tamiyarcracer
I'll put my bet on The EVO IV at worlds. Isn't Worlsd the end of this month?
I'll put my bet on The EVO IV at worlds. Isn't Worlsd the end of this month?
#974
Tech Master
Hmmm...A red Evo IV....sweet
#975
Tech Initiate
Originally posted by JDM_DOHC_SiR
I would only use the 9550 is you want any form of space inyour EVO4....
and as far as I know ...I"think" that Square is working on some Alloy ones now... not for sure
-Dave
I would only use the 9550 is you want any form of space inyour EVO4....
and as far as I know ...I"think" that Square is working on some Alloy ones now... not for sure
-Dave