|
Originally posted by ngo8 so does the suspension kit come with the rollbars and what size is the chassis 3mm or 2.5mm ? -Dave:tire: |
Originally posted by HYPA Hey guys, just ordered my Evo IV today and I was wondering if Tamiya have released a titanium turnbuckle set for the car? If not will any of the 415 turnbuckles fit? Cheers -Dave:sneaky: |
I hope they come out with the Evo IV Surikarn Edition with red anodized parts:nod:
|
Originally posted by V12 Thanks Dave. :) so if I want using the suspension upgrade kit on the EVO III maybe I also should go for the 415 blocks. Is the EVO IV using AA blocks or DD blocks in the front? Things like wheelbase and battery position may be a little different but in the end this should be very similar to an EVOIV. i think this is the lightest car ive ever had. the suspension blocks are same height as evo3 blocks. on the front the car comes with AA blocks for front and AE blocks on rear. you could put 415 blocks on to lower that roll center but remember to readjust the droop.;) the car comes with silver anti roll bars and links and mounts. iam just using the bars from the 415/evo3 range. |
Originally posted by izzyracer This might be to much to ask. but for ones who already has the EVO 4, can someone put together all the screws necessary to make up the kit? I'd like to have my screws ready. Thanks Here you go:D 3x14 Button x4 3x12 Button x8 3x10 Button x12 3x8 Button x36 3x16 Counter x2 3x10 Counter x5 3x8 Counter x35 I hope this helps you all out to get a head start:nod::sneaky: -Dave:tire: |
Originally posted by JDM_DOHC_SiR EVO4 Blocks = 415 Blocks:D |
Originally posted by Rick Draper No they arnt, they are evo 3 ones ie 415 ones + 1mm. Rick But thanks for the correction to what..I forgot to update..:sweat: ;) -Dave:blush: |
Hey guys, since the evoIV doesn't come with the roll bars is it possible to use the evo3 ones instead?
|
i believe so, i'll being doing some testing with that later on tomorrow
|
oh ok thanks... just seeing what i can still keep in my old evo3 hehe:lol:
|
opps double post:eek: :sweat:
|
Originally posted by HPZ Hey guys, since the evoIV doesn't come with the roll bars is it possible to use the evo3 ones instead? -Dave:D |
Originally posted by HPZ Hey guys, since the evoIV doesn't come with the roll bars is it possible to use the evo3 ones instead? |
Is the silver roll bar any particular stiffnest? eg. soft , medium or hard?:confused: i'm quite noob when it comes to these things, i like to get my info right :nod:
|
Originally posted by HPZ Is the silver roll bar any particular stiffnest? eg. soft , medium or hard?:confused: i'm quite noob when it comes to these things, i like to get my info right :nod: -Dave:tire: |
| All times are GMT -7. It is currently 07:24 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.