Pro 10: 235mm Le Mans Prototype Pan Car Discussion
#526
Tech Rookie
I designed new pod.
I designed new pod.
New pod is 10mm wider then original pod.
It removed axle shim.
All chassis made 3T carbon.
but wider bulkhead shaft is not making, yet.
I think, It will make next weekend and try to run.
I hope, It will good run.
Thanks guys for help.
New pod is 10mm wider then original pod.
It removed axle shim.
All chassis made 3T carbon.
but wider bulkhead shaft is not making, yet.
I think, It will make next weekend and try to run.
I hope, It will good run.
Thanks guys for help.
#527
A nice and quick job! well done
#528
looks good. With 3mm carbon that car will be quite durable. Did you make that clamp hub yourself? It looks longer then the clamp hubs from IRS.
I can't see it clearly but it seems you use a pinion with teeth where the edges are not 90 degrees. They seem to have a 45 degree angle going towards the top? I have bought similar 48dp pinions before but don't use them anymore as i found they damaged the spurs. I changed them to a normal 48dp pinion with straight teeth and the problem was gone.
I can't see it clearly but it seems you use a pinion with teeth where the edges are not 90 degrees. They seem to have a 45 degree angle going towards the top? I have bought similar 48dp pinions before but don't use them anymore as i found they damaged the spurs. I changed them to a normal 48dp pinion with straight teeth and the problem was gone.
Last edited by 2wdrive; 01-09-2012 at 01:15 AM.
#529
Tech Rookie
Thanks~
Thanks guys.
I'm very exciting bacause I will drive on saturday.
anyway..
The left clamp hub is IRS. (IRS220)
It not include 235mm axle set.
I didn't use the pinoin on the picture.
It use on Yokomo R12(1/12) that 64P
I'm using 90 degrees pinion 48P on 2s lipo pro 10.
I'm very exciting bacause I will drive on saturday.
anyway..
The left clamp hub is IRS. (IRS220)
It not include 235mm axle set.
I didn't use the pinoin on the picture.
It use on Yokomo R12(1/12) that 64P
I'm using 90 degrees pinion 48P on 2s lipo pro 10.
#534
Tech Initiate
To keep the tread alive, this vid though 2 years old is awesome.
Especially like the yellow car waiting for the car he's chasing to recover from the incident, true gentleman racing!
http://www.youtube.com/watch?v=A8ivIhZGjFg
Especially like the yellow car waiting for the car he's chasing to recover from the incident, true gentleman racing!
http://www.youtube.com/watch?v=A8ivIhZGjFg
#535
Ahhh... These are our German Pro10 friends driving Pro10 chassis with modified motors. We are talking about 6 turns Delta in there!!!
They race with a very high fun & friendship factor as was seen in this movieclip...
They race with a very high fun & friendship factor as was seen in this movieclip...
#536
From all the mod video's this one is my favourite.
http://www.youtube.com/watch?v=Ub6fLXI9m6A
Watch as they go past the driverstand full speed and seem to go straight into the wall at the end but steer into the tight turn at the last milisecond. That is some good driving there.
http://www.youtube.com/watch?v=Ub6fLXI9m6A
Watch as they go past the driverstand full speed and seem to go straight into the wall at the end but steer into the tight turn at the last milisecond. That is some good driving there.
#537
Tech Adept
iTrader: (1)
Does anyone know Freddy Smolik?
Hey guys. Im trying to get in touch with Freddy Smolik from Rcdevil. Just received my new PC10H3X 235mm pan car chassis from him and there's NO shocks with it. I've sent him a few emails now with no response and need the shocks to run the car in my National champs in just over a weeks time down here in New Zealand of which im the current No.1. Would really like to retain my title but cant do it without shocks. Any help would be much appreciated.
#538
That is a real pita. How many days are you already waiting for a reply? Even if they send it tommorow i am not sure you will get the shocks on time. Better prepare the old chassis to be sure.
I will see if i can contact him on this side of the pond
I will see if i can contact him on this side of the pond
#540
Tech Adept
You could try some Associated RC18 shocks. The earlier prototypes used AE shocks.