New Team CRC Gen-XL
#1246
Tech Apprentice
#1247
Tech Master
iTrader: (6)
some time ago and for a time, the 3342 plate was out of production. But then CRC recognized the demand and started offering them again. I purchased one recently for stiffening up the pod on my WGT. It's a slick way to stiffen the rear pod while still having easy access to the motor and lots of room for the wiring that feeds the motor.
#1248
Tech Apprentice
Hi Guys.
I'm already done building the XL, I've set everything box stock and added the aluminum left pod and the 4mm upper brace.
Electronics already installed but I'm getting confused with the rollout and gearing stuff.
I have 5 motor choices as of now:
21.5 BL =
13.5t BL =
17.5 BL =
10.5 BL =
5.5 BL =
Any tips on what starting rollout for these? Will be running in a large asphalt indoor track.
Thanks.
I'm already done building the XL, I've set everything box stock and added the aluminum left pod and the 4mm upper brace.
Electronics already installed but I'm getting confused with the rollout and gearing stuff.
I have 5 motor choices as of now:
21.5 BL =
13.5t BL =
17.5 BL =
10.5 BL =
5.5 BL =
Any tips on what starting rollout for these? Will be running in a large asphalt indoor track.
Thanks.
#1250
Tech Master
iTrader: (10)
Hi Guys.
I'm already done building the XL, I've set everything box stock and added the aluminum left pod and the 4mm upper brace.
Electronics already installed but I'm getting confused with the rollout and gearing stuff.
I have 5 motor choices as of now:
21.5 BL =
13.5t BL =
17.5 BL =
10.5 BL =
5.5 BL =
Any tips on what starting rollout for these? Will be running in a large asphalt indoor track.
Thanks.
I'm already done building the XL, I've set everything box stock and added the aluminum left pod and the 4mm upper brace.
Electronics already installed but I'm getting confused with the rollout and gearing stuff.
I have 5 motor choices as of now:
21.5 BL =
13.5t BL =
17.5 BL =
10.5 BL =
5.5 BL =
Any tips on what starting rollout for these? Will be running in a large asphalt indoor track.
Thanks.
#1253
Tech Apprentice
Slapmaster6000 and Car Breaker : thanks guys!
#1254
hey guys i got some bnib parts for this car as well as some crc foams willing to sell cheap just to get rid of it ...pm me
#1255
Tech Addict
iTrader: (9)
I have a Gen XL for sale cheap. Just want to try something different.
http://www.rctech.net/forum/r-c-item...eat-price.html
http://www.rctech.net/forum/r-c-item...eat-price.html
#1256
Tech Adept
#1257
Tech Master
iTrader: (10)
I have mine for sell. Loaded with a lot of good stuff.
http://www.rctech.net/forum/r-c-item...lot-parts.html
http://www.rctech.net/forum/r-c-item...lot-parts.html
Last edited by Car Breaker; 09-02-2013 at 06:43 PM. Reason: url error
#1258
Tech Initiate
Hi guys.
New to the forum and want to start in 1/12 next season so busy looking at different cars.
I can get a CRC Gen XL for a fair price but want to know from you guys although the answer might be biased, is the CRC Gen XL still a competitive car or is it worth just getting some of the newer models?
It will be run on outdoor asphalt running 13.5 blinky and mod.
Thank you for any information
New to the forum and want to start in 1/12 next season so busy looking at different cars.
I can get a CRC Gen XL for a fair price but want to know from you guys although the answer might be biased, is the CRC Gen XL still a competitive car or is it worth just getting some of the newer models?
It will be run on outdoor asphalt running 13.5 blinky and mod.
Thank you for any information
#1259
Tech Master
iTrader: (10)
Any 12th scale released in the past 6 years from major manufacturer are still very competitive. Most of the fast driver in our track beat our new car with ease. Just get to know your car. I have mine for sell you can think I am bias to sell mine. Take a look, price negotiable .