I just shaved every other tooth on the diff on the xray to try that out instead of doing it on the belt doing it to the belt will make it alot weeker.

Yes, teflon will stay on the belt and will act as a luberacant to the belts. I have done this on belts, shaft gears, spur gears, ect.

I wonder why there's no teflon treated pullies on the market?

azndragster.......

what teflon oil do you use and/or recommend??????

how long should i dip the pulleys and belt in the oil???

only coating the belts and pulleys with oil will work well or I have to dip them in the oil to do the best job????

SalvadoriRacing: Spray the belt with teflon spray

/AN

TexasRacer, have you had a chance to run your xray with the modified belt?

i bought 3mm belts.....

the supplier i found doesn't cut the belts narrower than 3mm....

but it's ok....

i'll try to run these belts, but it seems to be cut by a blind man!!!
uhaahuauauahuhahahahauhahau!!!

the belts are a little crooked, I think they don't have the best equipment to cut a narrow width with precision......

:lol: :cry:

AN.....

do you recommend any brand or model???

do you know a website/webstore????

Nope I actually didnt mod the belt I did it to the Diffs instead. I will be running them this weekend to let you know how it goes so far it feels alot better.

I dipped the pulleys overnight, I dipped the belts for a LONNG time.

Use a bike chain lube with teflon.

ok....thankz.....


i already was thinking about buy the FINISH LINE teflon "dry" oil for chain bike.....

i also saw some plastic unmolding teflon spray......but i'll try the oil.....

I think you can better soften a belt that lube it.

:rolleyes: just cut every other tooth on the diffs and use silicone spray or bicycle teflon oil the is weather proof type, armorall tire dressing works great. :D

Salvadori the rear belt on an xray is 3 mm and will work on a schumacher mi2 note that the thin 4mm schuie belt can snap with anything more powerful then 19t motor! so I dont know how it would hold up on a schui! :D

thaks guys,

but i've switched to shaft cars.....