HPI's new F1
#1021
#1022
Tech Adept
#1024
Tech Elite
iTrader: (2)
UF1 Series
This Saturday July 9th will be the 5th race of the UF1 Series , The Grand Prix of Cam Marino an F1 ONLY event...
http://uf1series.com/schedule.html
Also the new UF1 shirts have arrived ... Again Mike Rydwell has helped out on design and printing... Thank you dude... 100% of sales will go towards the Season Review Book...
http://uf1series.com/schedule.html
Also the new UF1 shirts have arrived ... Again Mike Rydwell has helped out on design and printing... Thank you dude... 100% of sales will go towards the Season Review Book...
#1025
Ah ok. That's what I have
http://www.rcmart.com/catalog/rc-bat...g-p-32503.html
I'm guessing then that the green-label one is shorter than the blue-label one? This one would just fit - if the wire came out the top... oh well back to mini packs for now...
http://www.rcmart.com/catalog/rc-bat...g-p-32503.html
I'm guessing then that the green-label one is shorter than the blue-label one? This one would just fit - if the wire came out the top... oh well back to mini packs for now...
#1026
Hey guys,
will this body fit den F10?
http://www.rcmart.com/catalog/rc-3ra...e-p-29142.html
The f10 is listed but i am a little confused that would really fit.
Someone tried it?
will this body fit den F10?
http://www.rcmart.com/catalog/rc-3ra...e-p-29142.html
The f10 is listed but i am a little confused that would really fit.
Someone tried it?
#1027
Tech Elite
iTrader: (2)
So it's official... There will be F1 racing at this years IIC race in Las Vegas
http://www.intchamps.com/
http://www.intchamps.com/
#1028
Raced my Formula Ten for the first time Friday.
Outdoor well prepped parking lot.
Used car, came with a ball diff and stock shock.
I swapped it from my parts car Cyclone S, HPI silver spring with whatever oil was in it.
Started with M compounds rear and softs front.
No stability on the straights and no steering.
Talked to a couple of local fast guys and changed the dampener plate grease.
To Kyosho 15000 diff grease, suddenly the car was dead stable. Just a few dabs on both sides and the then twisted the plates.
I was shocked what a change that made.
Went back to soft fronts and now I have too much steering.
Not sure where I'm going to go next, next race is in 2 weeks.
Thinking I'll buy a mini hard case lipo. Trying to decide if I'm gonna go back to soft fronts and take away steering or the kit fronts and try and add steering back in.
Outdoor well prepped parking lot.
Used car, came with a ball diff and stock shock.
I swapped it from my parts car Cyclone S, HPI silver spring with whatever oil was in it.
Started with M compounds rear and softs front.
No stability on the straights and no steering.
Talked to a couple of local fast guys and changed the dampener plate grease.
To Kyosho 15000 diff grease, suddenly the car was dead stable. Just a few dabs on both sides and the then twisted the plates.
I was shocked what a change that made.
Went back to soft fronts and now I have too much steering.
Not sure where I'm going to go next, next race is in 2 weeks.
Thinking I'll buy a mini hard case lipo. Trying to decide if I'm gonna go back to soft fronts and take away steering or the kit fronts and try and add steering back in.
#1029
Tech Champion
iTrader: (15)
Raced my Formula Ten for the first time Friday.
Outdoor well prepped parking lot.
Used car, came with a ball diff and stock shock.
I swapped it from my parts car Cyclone S, HPI silver spring with whatever oil was in it.
Started with M compounds rear and softs front.
No stability on the straights and no steering.
Talked to a couple of local fast guys and changed the dampener plate grease.
To Kyosho 15000 diff grease, suddenly the car was dead stable. Just a few dabs on both sides and the then twisted the plates.
I was shocked what a change that made.
Went back to soft fronts and now I have too much steering.
Not sure where I'm going to go next, next race is in 2 weeks.
Thinking I'll buy a mini hard case lipo. Trying to decide if I'm gonna go back to soft fronts and take away steering or the kit fronts and try and add steering back in.
Outdoor well prepped parking lot.
Used car, came with a ball diff and stock shock.
I swapped it from my parts car Cyclone S, HPI silver spring with whatever oil was in it.
Started with M compounds rear and softs front.
No stability on the straights and no steering.
Talked to a couple of local fast guys and changed the dampener plate grease.
To Kyosho 15000 diff grease, suddenly the car was dead stable. Just a few dabs on both sides and the then twisted the plates.
I was shocked what a change that made.
Went back to soft fronts and now I have too much steering.
Not sure where I'm going to go next, next race is in 2 weeks.
Thinking I'll buy a mini hard case lipo. Trying to decide if I'm gonna go back to soft fronts and take away steering or the kit fronts and try and add steering back in.
Most F10's are so hooked up with soft/soft tires that this car will push. When you get to this point then you know your set up is getting there so that you can run the light battery.
#1030
OOOPs it was M compounds front and rear but plenty of rear traction.
Thanks for the tip on the spring.
I'd love to throw the Exotex chasis on this but for not I'm trying to run it as cheap as possible as a challenge. After eBay bucks I'm only $80 into this car.
Thanks for the tip on the spring.
I'd love to throw the Exotex chasis on this but for not I'm trying to run it as cheap as possible as a challenge. After eBay bucks I'm only $80 into this car.
#1031
got my F10 and built it...already have the Exotek chassis coming, I guess if my batteries were rounded on the side it would of been alright, but like graphite more then plastic. Upgraded to bearings and motor pods are on the way.. can't wait to start running it.
#1032
Tech Addict
iTrader: (57)
Great cars but unfortunately I never have the time to take mine to the track. If anyone wants to go race with Donn, my upgraded one is for sale
http://www.rctech.net/forum/r-c-item...es-spares.html
http://www.rctech.net/forum/r-c-item...es-spares.html
#1033
Tech Elite
iTrader: (2)
UF1 Series
This Sunday August 14th... UF1 Series race 6 will be at Monte Carlo ( Speedtech )
http://uf1series.com/schedule.html
http://uf1series.com/schedule.html
#1034
I bent my right rear hub yesterday. Kinda need it for Sundays race at Speedtech. I'm calling around to find one but if I don't any chance someone out there can bring one to sell me?
Hpi Part number #102829
Hpi Part number #102829