kabus

Hi,

with rubber tires you should also try S on the front and M on the rear,
this works really good. In this way you get a bit more steering without loosing
grip on the rear.

If it's quite cold use S-Tires front and rear.

Kind regards,

Kabus

MaxSp97

iTrader: (5)

I had so much fun at Surf City yesterday with my new HPI Formula 10. Thanks to Hiro for let me using his F10 tires, Charlie B. for a fun day and all my Roadrunners buddies.
UF1
Also! Nice to meet you Mike R.
Here is few pictures of my F10.
BTW the avatar will change...

FREAKAH

Beautiful car. Looks like an actual team livery.


So how did it compare to the F104?

And how did you attatch the front wing?

MaxSp97

iTrader: (5)

First look at the car with high nose (as same as real F1)
The car is so much easy to setup and drive compare with the F104.
Front wing install is very easy just mount the wing to the last hole of the high nose and tighten the screw, use the front hole of the high nose for guiding to drilling the wing (make sure the wing straight before you drill it.). I added spacers between the high nose to lower the wing.

Blueman Austria

What type of battery do you run with this body?
4cell NIMH i think ?!?

Looks very nice !

MaxSp97

iTrader: (5)

Thanks for the kind words..
I used Duratrak 1800 2S. The chassis is made by Exotek. I'll post few picture later today without the body.

Hi-LowBlow

iTrader: (1)

Hi Calvin,
It was great to see you at the track last Sunday. Wow! your car looked super cool both on the pit table and on the track!

I highly recommend you to try the gold springs that should help you. Also, you might want to play some with ackerman adjustment.

Please let me know if there is anything i can do for you.
See you soon at the track!

Thank you.
-Hiro

Blueman Austria

Aha. Ok i understand.

Hm does the body also fit the kit tub chassis with 4cell NIMH pack?
An what motor do you run with the 1/18 Lipo pack?

Greetz Rainer

Daholla77

Is this vehicle good for bashing, there no real close tracks were I live?

MaxSp97

iTrader: (5)

Rainer,
I don't think the F60 body will fit the kit chassis.
I run Novak Ballistic 21.5
Here are the pictures of my F10.

MaxSp97

iTrader: (5)

Here are the pictures of the front wing. You will see I drilled another hole...

MaxSp97

iTrader: (5)

The F10 is not good for bashing, if you love the open wheel then go for it. You should get the Touring Car is good for bashing around.
Here are the links:
http://www.hpiracing.com/hpikits/e-on/
http://www.tamiyausa.com/product/cat...php?main-id=30

MaxSp97

iTrader: (5)

Thanks again Hiro,
I changed the steering rods to the front holes. You could see in the picture.
I ordered couple set of the S/M tires and the springs yesterday, hope they will come before this Friday.

Blueman Austria

Nice pics! Thank you!

Another question. The holder for the 1/18 Lipo is optional. is there also the Body post holder without the holders for the standrard 2S Lipos included, or have you cut the holders of?

On the Exotek HP you can find the following test:

"MAX BATTERY SIZE 34X25X88MM. REQUIRES CUTTING OFF OF THE FX10 ‘WINGS’."

How long is the runtime with the 1/18 Lipo?

Greetz Rainer

MaxSp97

iTrader: (5)

You have to cut the battery holders (wings) to fit the F60 body.
The battery run time is 6-8 minutes race.