The Speed Passion Thread
Hi All Speed Passion Guru's. I have a revention 1.1 pro 2 cell ESC and the website says it can run 1 cell as well. Has anyone run 1 cell lets say a 1/12 scale before and is there anything i would have to do like run the RX of a booster battery etc or is this built in like other ESC that run 1 cell.
Thanks guys.
Thanks guys.
Tech Addict
iTrader: (19)
Hi All Speed Passion Guru's. I have a revention 1.1 pro 2 cell ESC and the website says it can run 1 cell as well. Has anyone run 1 cell lets say a 1/12 scale before and is there anything i would have to do like run the RX of a booster battery etc or is this built in like other ESC that run 1 cell.
Thanks guys.
Thanks guys.
Nice thanks for the reply. We have been running blinky 10.5 in 1/12 here and my old speed passion is down on power. The orca speedie is much quicker so I hope this speedie will work and kick some butt
Tech Fanatic
iTrader: (2)
Hi All Speed Passion Guru's. I have a revention 1.1 pro 2 cell ESC and the website says it can run 1 cell as well. Has anyone run 1 cell lets say a 1/12 scale before and is there anything i would have to do like run the RX of a booster battery etc or is this built in like other ESC that run 1 cell.
Thanks guys.
Thanks guys.
For the Booster you have to connect it to the positive/negative battery terminals on the esc and then plug it into your receiver. Just like the above notation concerning the use of an Rx pack, do NOT cut any of the wires to either the esc or the booster. Simply plug the booster into the power slot of your receiver. Then, just like you would do for an Rx pack, turn the esc on using the booster switch.
Tech Regular
asking again, will the reventon pro 1.1ex perform egual with the regular 1.1 in touringcars with 2s? looking for a new esc, and want a black one
Tech Legend
iTrader: (1212)
BTW LRP X20 motors have the same issue as Viper motors with having to remove the temp sensor wire from the sensor harness.
hey guys i just bought the reventon r and i need help connecting it to the reciver...i did all the steps but it wont connect....the problem is that i do all the steps and turn off the esc and turn in back on it goes full throttle and i can control it....i check all the trims and are okai...so i thought it was the trim and i move the trim to reverse in 12% and it immediately stop but it wont let me go reverse or go foward..so i thought it was my control and reciver and i put another one but i did the same thing
please some one help mee
please some one help mee
hey guys i just bought the reventon r and i need help connecting it to the reciver...i did all the steps but it wont connect....the problem is that i do all the steps and turn off the esc and turn in back on it goes full throttle and i can control it....i check all the trims and are okai...so i thought it was the trim and i move the trim to reverse in 12% and it immediately stop but it wont let me go reverse or go foward..so i thought it was my control and reciver and i put another one but i did the same thing
please some one help mee
please some one help mee
Tech Addict
iTrader: (19)
hey guys i just bought the reventon r and i need help connecting it to the reciver...i did all the steps but it wont connect....the problem is that i do all the steps and turn off the esc and turn in back on it goes full throttle and i can control it....i check all the trims and are okai...so i thought it was the trim and i move the trim to reverse in 12% and it immediately stop but it wont let me go reverse or go foward..so i thought it was my control and reciver and i put another one but i did the same thing
please some one help mee
please some one help mee
Tech Champion
iTrader: (42)
Tech Regular
ok, thanks!
Tech Apprentice
Hello Guys,
I have just purchased a Reventon Pro ESC + v3.0 4.5r Motor combo for my touring car.
I have run hobby wing in the past and thought i would give this ago for the $.
Are there any issues that i should be aware of before i install this combo.
I have read a few threads and people have had various issues. Im hoping to have none
Im a speed passion virgin so ... be easy on me
Ray
I have just purchased a Reventon Pro ESC + v3.0 4.5r Motor combo for my touring car.
I have run hobby wing in the past and thought i would give this ago for the $.
Are there any issues that i should be aware of before i install this combo.
I have read a few threads and people have had various issues. Im hoping to have none
Im a speed passion virgin so ... be easy on me
Ray
Tech Regular
iTrader: (21)
My son and I both ran our 1/10 scale buggies last night with the SP Reventon-R and 10.5R combo's and we LOVED them, lots of speed, cool motor/esc temps, no problems.
Tech Master
iTrader: (32)
Hi All,
Has anyone experienced an instance with their Reventon Pro 1.1 where the esc shuts off and when you try to power it back on it lights up when you press the button, but doesn’t stay on? It happened to me and I unplugged the battery and plugged it back in, tried a different battery and it kept doing that. I plugged it into the PC to reflash it and it was showing 1.5V as the input. I reflashed it and, on the bench, it seems fine now. I’m planning on sending it back, but just curious if anyone else has seen this before? Could the caps be going bad?
Thanks,
Jose
Has anyone experienced an instance with their Reventon Pro 1.1 where the esc shuts off and when you try to power it back on it lights up when you press the button, but doesn’t stay on? It happened to me and I unplugged the battery and plugged it back in, tried a different battery and it kept doing that. I plugged it into the PC to reflash it and it was showing 1.5V as the input. I reflashed it and, on the bench, it seems fine now. I’m planning on sending it back, but just curious if anyone else has seen this before? Could the caps be going bad?
Thanks,
Jose
Hey, I have a question about adjusting the timing in Speed Passion motors mainly the 21.5 Competition V3. I know to change timing you must buy a different sensor. If I bought the +20˚ green sensor would it be 20˚ moved to the right all the way or is the sensor itself +20˚?
Shane
Shane