The Speed Passion Thread
Tech Apprentice
We don't have a Speed Passion Distributor in Canada, nobody wants to deal with all the failures I guess.
Dealing with RCMart is worse than dealing with SP... well not really, at least they reply to e-mails.
Tech Elite
iTrader: (2)
Can't, won't, don't care....... I've heard them all before from SP.
We don't have a Speed Passion Distributor in Canada, nobody wants to deal with all the failures I guess.
Dealing with RCMart is worse than dealing with SP... well not really, at least they reply to e-mails.
We don't have a Speed Passion Distributor in Canada, nobody wants to deal with all the failures I guess.
Dealing with RCMart is worse than dealing with SP... well not really, at least they reply to e-mails.
Cheers
Rob.
I get the feeling that the SP ESC's from RCMart may be counterfeit, thats why SP doesn't let you register them for warranty, and they tell you to go back to RCMart if you have any problems.
The only reason I went with RCMart was because the shipping to Canada was only $9, if I ordered it from SP USA they wanted $35 to ship. They claimed that there was no cheaper method when I questioned the shipping cost. That should have been my first reason too walk away.
Tech Master
iTrader: (3)
Join Date: Nov 2001
Location: Land of high taxes and bad football
Posts: 1,808
Trader Rating: 3 (100%+)
I have a Reventon Pro. Works great.....no problems. That is all.
Tech Regular
I get the feeling that the SP ESC's from RCMart may be counterfeit, thats why SP doesn't let you register them for warranty, and they tell you to go back to RCMart if you have any problems.
The only reason I went with RCMart was because the shipping to Canada was only $9, if I ordered it from SP USA they wanted $35 to ship. They claimed that there was no cheaper method when I questioned the shipping cost. That should have been my first reason too walk away.
The only reason I went with RCMart was because the shipping to Canada was only $9, if I ordered it from SP USA they wanted $35 to ship. They claimed that there was no cheaper method when I questioned the shipping cost. That should have been my first reason too walk away.
i bought my reventon pro with v3 motor combo from rcmart ($129 with free shipping is hard to beat!) i registered my esc on speedpassion.net without any problems!
the esc was really easy to program and setup, looking forward to test it on the track!
Tech Rookie
Hi,
I am setting up my Speed Passion reventon pro for the 1st time in 13.5 boosted.
I was just wondering what the following mean in regards to boost and turbo?
1) Hybrid boost active, this ranges from 30% up to 100%. (in 10% steps)
2) Hybrid boost maximum, this ranges from 110k up to 150k. (in 5k steps)
3) Hybrid boost start rpm, this ranges from 3000 rpm up to 15000 rpm. (in 1000 rpm steps)
4) Hybrid boost delay, this ranges from 0s up to 0.8s. (in 0.1 steps)
Thanks
I am setting up my Speed Passion reventon pro for the 1st time in 13.5 boosted.
I was just wondering what the following mean in regards to boost and turbo?
1) Hybrid boost active, this ranges from 30% up to 100%. (in 10% steps)
2) Hybrid boost maximum, this ranges from 110k up to 150k. (in 5k steps)
3) Hybrid boost start rpm, this ranges from 3000 rpm up to 15000 rpm. (in 1000 rpm steps)
4) Hybrid boost delay, this ranges from 0s up to 0.8s. (in 0.1 steps)
Thanks
Tech Regular
looking at the recommended settings in programming turbo and boost for a 8.5, but unsure where to start regarding the gearing..
will be running om a fairly large asphalt track, would 6.6 be a good start in gearing? motor is a sp v3 8.5t
will be running om a fairly large asphalt track, would 6.6 be a good start in gearing? motor is a sp v3 8.5t
looking for gearing for speedpassion v3 6.5t motor with tekin rs pro on tc6 touring car 120 feet straight. thanks
Tech Regular
my 8.5R motorshaft is bend, where can i get a cheap new one? (shaft/rotor/whatever i need to fix it). This one: http://shop.teamspeedpassion.com/com...rotor-super-7/ seems a bit expensive for a motor which only costs 10$ more.
Tech Master
iTrader: (3)
Join Date: Nov 2001
Location: Land of high taxes and bad football
Posts: 1,808
Trader Rating: 3 (100%+)
my 8.5R motorshaft is bend, where can i get a cheap new one? (shaft/rotor/whatever i need to fix it). This one: http://shop.teamspeedpassion.com/com...rotor-super-7/ seems a bit expensive for a motor which only costs 10$ more.
Just curious.....how did you bend the motor shaft?
Tech Regular
it rolled of my desk when i was soldering and fell on the ground.
Stock
I have a speed passion stock spec speedo and it has pretty much zero brake . Is there any way to fix it? Also I have the speed passion dyno programmer is it compatable with the spec speedo?
Tech Master
iTrader: (3)
Join Date: Nov 2001
Location: Land of high taxes and bad football
Posts: 1,808
Trader Rating: 3 (100%+)