Originally Posted by ^jynx^

Your right it is the S. but either way the brakes suck out of the box. I'm assuming I need the card to adjust it?

Originally Posted by Cale79

As i wrote i had the same problem. As i now tryed to start the program as administrator it worked flawless. So try that

I updated the esc with stock1. The programbox with 2.7. At the track i had the problem my esc didnt do anything anymore. So make sure u test it. The esc didnt want to start up anymore. After putting the 2.4firmware into the programbox it worked fine again. All setting also the hybribboost work great.

This esc is a monster !

Originally Posted by Chrisg23

Ok, I'm about to install a reventon pro in my 17.5 tc. And have a few questions;

1) how to I install the 'stock 0' blinks mode software onto the esc?
2) will I have compatibility issues with the Novak 17.5 motor?

Originally Posted by Sean Williams

Ran my Reventon Pro Over the weekend in modified Touring Car.

My car did some of the quickest laps with Stock1 V20 firmware w/4.5t, No problems.......ESC ran awesome! Thanks Albert!!!

Originally Posted by 2Quick

I updated my Reventon Pro to the latest Fleta 4 stock1 software and now cannot do any settings via the speed passion program box, only via the pc interface on the fleta software. I tried to revert back to the speed passion software but it does not support the files installed on the esc.
Any ideas how to flash the esc to speed passion software as I would like to do setup changes via program box at the track.

Originally Posted by WMGary

Download Reventon PC program from Speed Passion website. File name is "Reventon PC Program with USB Driver V1.1.0.22".
Download link: http://www.speedpassion.net/en/download.asp

Video link: http://www.speedpassion.net/en/video.asp?c=2
Follow the video instruction to install the PC program and update ESC firmware.

Reventon Pro should be work on Novak 17.5 motor. If the ESC is stop suddenly when running, refer speed passion website about motor temperature problem. http://www.speedpassion.net/files/So...eventonPro.pdf

Originally Posted by kavajas

Hi there, you have to put the Fleta softwear at Reventon box.
http://imageshack.us/a/img849/5051/cimg0228j.jpg
Regards,

Originally Posted by ^jynx^

ok so I ordered the LED Program Card. I dont race, just bash with some friends so I didnt feel like I needed any thing fancy. It should be here tomorrow. Is there anything I need to know or is it pretty user friendly?

Originally Posted by 2Quick

Thanx for responding.
Can you explain how to update box to fleta software ?
I tried to update the box via the fleta software as per the manual by pressing the reset button while attaching the usb cable to pc. The screen opens with no option to update firmware..