The Speed Passion Thread
#9481
Tech Elite
iTrader: (15)
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
I have a cirtix stock club race that is acting up. It has been sitting in my TC without a motor hooked to it for a few months. I soldered on a motor and tried to calibrate it and it is not working. I can go through the calibration but when trying to run the motor if I do not spin the motor first by hand nothing happens. I have tried two different motors that both work with my other Cirtix stock club race ESC??
#9484
Tech Master
iTrader: (70)
NEW Sensor Boards available
The new sensor boards are on the site and in stock!!!
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
#9486
Tech Champion
iTrader: (4)
The new sensor boards are on the site and in stock!!!
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
#9487
Tech Fanatic
iTrader: (10)
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
Last edited by silverhkswrx; 06-01-2012 at 03:18 PM.
#9492
Tech Champion
iTrader: (17)
The last month version are all BLACK in color, they are the pre-production unit that can only be used around the world EXCEPT USA. I need them to be color coded so the tech can spot the sensor from the outside of the can what sensor that they are using. We don't do hand out motor racing much in USA but this actually helped to spot if anyone alter the sensor if they are suppose to use the stock black unit. This is very important for other country that do hand out racing beside USA.
#9494
Hey guys im thinking of getting a speed passion esc 2.0 ....can i just flash that speedo to get the 2.1 software and is that the latest software .....sorry for all the newbie questions but its my first time with speed passion.