|
Originally Posted by Dog Runner
(Post 10779907)
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
Originally Posted by CR0SS
(Post 10780388)
I have a cirtix stock club race that is acting up. It has been sitting in my TC without a motor hooked to it for a few months. I soldered on a motor and tried to calibrate it and it is not working. I can go through the calibration but when trying to run the motor if I do not spin the motor first by hand nothing happens. I have tried two different motors that both work with my other Cirtix stock club race ESC??
|
Originally Posted by M-Technic
(Post 10787748)
Did you try a different sensor wire? It definitely sounds like a sensor problem.
|
Originally Posted by CR0SS
(Post 10800336)
Two different wires, one which is currently being used in another car with no problems.
|
NEW Sensor Boards available
The new sensor boards are on the site and in stock!!! :nod::tire::nod::tire::nod:
+30* yellow and +40* blue http://www.speedpassion.net/us/produ...SP000059&c=OPT |
What kind of motor ? if this is one of the earliest versions on the ESC, then they did not run all types of motors...
Originally Posted by CR0SS
(Post 10800336)
Two different wires, one which is currently being used in another car with no problems.
|
Originally Posted by burgboyz
(Post 10802841)
The new sensor boards are on the site and in stock!!! :nod::tire::nod::tire::nod:
+30* yellow and +40* blue http://www.speedpassion.net/us/produ...SP000059&c=OPT |
Originally Posted by Dog Runner
(Post 10779907)
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
http://static.banzaihobby.com/bmz_ca...ge.290x181.jpg http://forums.radiocontrolzone.com/forumupload/5664.png http://desmond.imageshack.us/Himg245...pg&res=landing |
USB Adapter
I have (4) NIP Cirtix USB Adapter's #SPESCPB02. If you want them, you can have them for shipping costs. PM with details. First 4 get them.
|
Originally Posted by SRW141
(Post 10804116)
They will not sell them in the States till they are Roar legal.
|
Originally Posted by Solara
(Post 10822962)
We have to sell them in USA before ROAR can list them legal....Ron Schuur from ROAR already approved these sensor verbally....
|
How are you attaching them to the ESC? I don't see any screw holes on my GTPro.
|
Originally Posted by SRW141
(Post 10823268)
I just placed my order this morning. I hope Albert gets them out to me. I'm ready to try them. I tried to buy them the other month and KingGolden sent me an email saying they couldn't sell them in the states.
|
Originally Posted by cdwilliams1
(Post 10823332)
How are you attaching them to the ESC? I don't see any screw holes on my GTPro.
|
Hey guys im thinking of getting a speed passion esc 2.0 ....can i just flash that speedo to get the 2.1 software and is that the latest software .....sorry for all the newbie questions but its my first time with speed passion.
|
Originally Posted by theatriks
(Post 10826851)
Hey guys im thinking of getting a speed passion esc 2.0 ....can i just flash that speedo to get the 2.1 software and is that the latest software .....sorry for all the newbie questions but its my first time with speed passion.
|
| All times are GMT -7. It is currently 07:53 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.