Originally Posted by JRRobiso (Post 9763841)

Thanks Solara! It's a good thing I checked in here first with you SP experts before going to the park this week with my daughter and if I didn't...I could've just smoked away the $$ I spent to buy the stuff. Since I earlier purchased in late August a SA V2.0 ESC and 3S Lipo batt pack before consulting with you guys...I guess I will need to find a rig for that one since that combo won't fit the SC104x4...hmmm...a Losi 10-SCTE 4WD might be next on my list.

Solara, would a SA V2.0 5.5R work with the Losi or should I get the Cirtix Slotless Sensored Motor for 1/8 - 2200/2500KV?

Thanks again for the help. :nod:

Originally Posted by Solara (Post 9763916)

Depends on how many cells you are running...you must run at least 3S on the SILVER ARROW and LOSI is a way too heavy SCT for the 5.5....Ciritx Slotless will work but you must run 3S or more...4S is the best. 2200 will work...2500 might get too hot for 4S. But should work great with 3S.

Originally Posted by Solara (Post 9762727)

Actually, MMM is more advanced then the 1S...lap time don't lie, MMM is hands down faster then V3 and 1S V3...try it.

Originally Posted by cm.stites (Post 9767378)

Will the Gt 2.0 LPF series be able to power a tekin sc4x 4.5t (4000kv)in a losi ten scte? its a 550 size motor.I was going to go with the silver arrow till i read it doesnt like running on 2s as all the tracks here make us run 2s for sc.

Originally Posted by cm.stites (Post 9767378)

Will the Gt 2.0 LPF series be able to power a tekin sc4x 4.5t (4000kv)in a losi ten scte? its a 550 size motor.I was going to go with the silver arrow till i read it doesnt like running on 2s as all the tracks here make us run 2s for sc.

Originally Posted by wingracer (Post 9767528)

Sorry if this has been asked before but I don't feel like digging through over 500 pages :D

I'm looking for a dirt cheap speedo for blinky TC and oval racing. I see the Cirtix Inspire 2.0 is dirt cheap. How does it do in 2s 17.5 tc and/or 1s 17.5-13.5 oval racing? Also, I don't see it on the ROAR approved list. Is it legal or just waiting for approval or what?

Originally Posted by trytowin (Post 9767438)

When will there be more MMM 17.5 motors available? Have called a couple of hobby shops in the Chicagoland area, and nobody has them. Even the SP website shows them out-of-stock, any ideas? Thanks.:)

Originally Posted by mattwoodcraft (Post 9766634)

i am about to install my +10 degree in my 17.5 turn V3 i know you need to change the ratio with the MMM but what about the V3 should i drop a tooth or just do a few laps and then temp it ?

thanks

Originally Posted by Solara (Post 9767737)

Cirtix CLUB SPEC is what you need....it is ROAR legal. Inspire is sensorless esc.

It can be used with 1S only if you are using the TQ Cell booster (this is the ONLY 1 that will work).