|
What settings are u guys using for sensorless motors on the ex gt2.0. These escs don't seem to like sensorless motors. But work Awsome with sensored motors. It cogs Down low with sensorless. Also had a problem with my lvp cutting in way to early. So just turned it off and all good now.
|
hi...need help.. :nod:
soon I/we are going to have a race on carpet (10x25 m) car : 416 WE Tires : Foam, shore 37 F/R (controlled tires based on rules), i used 58 mm outer diameter :tire: I'm using SP GT 2.1 Pro Stock with single Caps 25V 2700 in it. software #528 installed w/ SP V.3 11.5T ...and here are my sets : 1.1 2.2 3.5 4.7 5.4 6.4 7.1 8.2 9.6 10.2 11.- 12.9 13.5 14.4 15.4 problem is : using FDR 7.7 (105/28*2.055)...the looked so late to catch up the front car at straight lane on last practice.... but the speed at corners and sweeper looked good... motor runs after running 30 mins at 75 deg...any suggestion...please..? :nod: thanks..;) |
DROP 13, 14, and 15, by two numbers
|
Originally Posted by skypilot
(Post 9016190)
DROP 13, 14, and 15, by two numbers
|
Originally Posted by Blitzrockey
(Post 9012745)
What settings are u guys using for sensorless motors on the ex gt2.0. These escs don't seem to like sensorless motors. But work Awsome with sensored motors. It cogs Down low with sensorless. Also had a problem with my lvp cutting in way to early. So just turned it off and all good now.
|
Originally Posted by BadSign
(Post 9012428)
I just purchased a Cirtix Spec Stock ESC. I can't seem to get it to setup. I'm using a Helios X-10 and Ballistic Motor. I've tried an older Novak SS as well, but after the set-up process, the ESC still stays at neutral. I've tried reversing the throttle on the Rx, turning the epa from 150 to 100, but nothing seems to work. Can someone give me some idea what to do?
|
Sometimes the Citrix doesn't like Novak motors. Try another motor that is not Novak.
|
Try this:
Unplug the sensor harness, turn the ESC on, plug the harness back in. |
Originally Posted by irgo
(Post 9019975)
the firmware for sensoreless is better on old 205firmware, try it.
Thanks |
Originally Posted by BadSign
(Post 9020246)
Has anyone else had this problem?
Originally Posted by Madulla
(Post 9021311)
Sometimes the Citrix doesn't like Novak motors. Try another motor that is not Novak.
Originally Posted by thunderbt3
(Post 9021383)
Try this:
Unplug the sensor harness, turn the ESC on, plug the harness back in. Otherwise you may have to talk to SP service. |
Well the problem is now fixed, Albert and SpeedPassion are replacing my Cirtix Spec with a brand new unit. Thanks for the excellent service!
|
Where do I find the software for my comp.to down load the new software for esc.a part # would be nice.
|
Very nice, browsed the pages a bit and found my answer. The 2.1 Pro Stock is a decent speedo. Liking it...
|
Originally Posted by jtsbell
(Post 9023746)
Where do I find the software for my comp.to down load the new software for esc.a part # would be nice.
http://www.speedpassion.net/us/download.asp Item that you will need is here.. http://www.speedpassion.net/us/produ...=SPLCD01&c=OPT |
My son and I are jumpin' back in to the hobby after apx 4+ years away. I am impressed with the quality and usability of the SP products. I purchased a GT2.1Pro Stock for my TC6 and a 2.1EX for my 1/12th. Fantastic speed controls! With the help of Team Driver Billy Sydor, the steepness of the learning curve has truly been lessened. The new 1 cell motors are the icing on the cake! :nod:
Thanks to Bill for all his help, --and-- Thanks to Speed Passion for making outstanding products! :tire::tire::tire::tire::tire::tire::tire::tire:: |
| All times are GMT -7. It is currently 06:50 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.