|
i havent seen alot of talk about the new 2.1ex speedos.. have any of you guys tried it out and what do you think??
|
Originally Posted by tha Beast
(Post 8116322)
i havent seen alot of talk about the new 2.1ex speedos.. have any of you guys tried it out and what do you think??
|
many make it over just have to wait and get it from the right people.
|
Originally Posted by geubes
(Post 8116144)
I also was running at the same track as Shaun today.
Myself and 2 other SP esc drivers all suffering the same issue, seemed to be when going from Full throttle straight onto heavy braking the brakes wouldnt work properly, they seemed to work and then fade and the strength of the brakes faded. Initial brake was good, slow speed brakes good, but after the first 0.1 of braking they seemed to fade as if the ESC ran out of power. my settings were: Brakes 100 reverse force 50 initial 0 We couldnt cure it.... mayb its time for a firmware update? as hte Tekins could turn inside us, even if they couldnt outpace us :cool: No idea why a reverse setting should have that effect, but its true. |
Originally Posted by wallstreet
(Post 8116196)
Anyone running a speed passion in off road... I can't decide on a speedo
|
Brushless ESC's are getting close to being as smooth as brushed motors. However Speed Passion is leading the way in that initial smooth power delivery I remember from a brushed set up. Kudo's to the SP GT ESC's!
|
After I figured out what profile to use (the non turbo mod one) for offroad the speedos have been just fine. At first I was trying to use the stock turbo profiles, since I was running a 13.5 and it wasn't smooth at all. I'm using them in 4wd buggy with an 8.5 and 2wd with a 10.5 now and they seem fine.
|
Originally Posted by Ritchie T
(Post 8103261)
Hi ive broken the switch on my 2.1 stock spec, is it possible to get a new switch anywhere?
Ive shortened the wire so cant send it back for repair btw. |
Originally Posted by Joel Lagace
(Post 8113072)
I hope there is an android app for the speedpassions! please... android is the future.
Originally Posted by RCHR Racer
(Post 8113221)
Solara,
Hi, Can the 528 Mod firmware be used in a GT2.0pro ? Is there an advantage to this speedo over my GT2.1pro with an 8.5 V3 and/or 7.5 V3 for offroad, your opinion/knowledge base? Thanks a billion ! Brandon
Originally Posted by fjm9898
(Post 8113612)
bring back the 2.1ex!
|
Originally Posted by encore75
(Post 8113945)
Solara has previously mentioned that it would be ported for Android as well. You can also see "Android" right there in the picture from the hobby show under "Compatible With:" :rolleyes:
http://www.rctech.net/forum/attachme..._1972578_n.jpg Solara, any ETA on when the mobile app will be available for Android? About window mobile (I am a PC as well)...I think it will be right after the APPLE and ANDROID, short after or they will be release at the same time. |
Originally Posted by geubes
(Post 8116144)
I also was running at the same track as Shaun today.
Myself and 2 other SP esc drivers all suffering the same issue, seemed to be when going from Full throttle straight onto heavy braking the brakes wouldnt work properly, they seemed to work and then fade and the strength of the brakes faded. Initial brake was good, slow speed brakes good, but after the first 0.1 of braking they seemed to fade as if the ESC ran out of power. my settings were: Brakes 100 reverse force 50 initial 0 We couldnt cure it.... mayb its time for a firmware update? as hte Tekins could turn inside us, even if they couldnt outpace us :cool: I don't drive exactly like that and I don't experience brake fading.... |
Originally Posted by FLAT OUT
(Post 8115982)
Hi I have a speedpasion GT 2 Pro, I have a LCD programmer, I have no idea how to use it to update to the new software. Is 528 the most up to date stock software ?? How do I set it all up ??
|
Originally Posted by Dave H
(Post 8117933)
Yep, several of them even. They seem to work great. :)
Mike (wallstreet), stop looking around and stop thinking too much, it will heart your brain....get Speed Passion. And un-retire from RC. DO IT... Tell your buddy NEXUS to do the same too....:sneaky:
Originally Posted by Racecrafter
(Post 8118084)
Brushless ESC's are getting close to being as smooth as brushed motors. However Speed Passion is leading the way in that initial smooth power delivery I remember from a brushed set up. Kudo's to the SP GT ESC's!
|
Originally Posted by Besercoe
(Post 8116739)
Set reverse force to full, and you will have lockup brake power.
No idea why a reverse setting should have that effect, but its true. Yes...my REVERSE setting is ALWAYS 100%....it is not just using it for reverse, it is somehow engineered to help for the brakes. On tight track setting...I use as high as 20% drag braking and only 75% brakes with 100% reverse...I have NEVER expereinced my brake is fading or disappeared........but I don't usually yake the brake and do a complete stop just to cut into the inside line. I usually let the car roll into the corner and carry as much corner speed as possible....or I will hit the board and broke..LOL |
Originally Posted by Solara
(Post 8119826)
I will have this forward to our software guy....how about a bigger capacitor..?
I don't drive exactly like that and I don't experience brake fading.... |
| All times are GMT -7. It is currently 07:33 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.