Check out the LHS that made the pre-order from us last month...the current batch were all sold out, but checkout the LHS and other online dealers...

Also...I am hoping you are not going to use it on your TCX....it is not suppose to be use on 2S TC.

Yes...please do gear down alot since you are running a small CARPET track. The one on SP site is from Jimmy Stegen and the track was a 125 x 275 1/8th on road track...hugh different in gearing.

I would guess (again, if I am the one running) using 8.2 final drive, then use Jimmy's setup...adjust your #14 to 0.1s or so and leave the rest the same as Jimmy's setup should be a good start. Temp your motor and compare your lap time and adjust gearing....

#4, #14 and #15 should be the area that you should adjust.

Let us know your finding and I can have that posted on the SPEED PASSION website.

He whipped my Tekin butt last night again, :lol::lol:, no more set up help for you!:lol::lol:

So what version sofewear is the use for the roar stock spec. The 1 with no boots and timing?

There should a version you can choose which has NO TIMING next to it on the upgrade tab.

EDIT: It will read 508 No Timing.

Well, you are using the wrong ESC, thats why...:lol:

BTW....208 is no longer legal for spec racing. Just for you to know....

The full name is 508_no_timing (thanks Freddy).........that is the software name, if you are planning to use the ROAR sportsman rule software.

We are submitting the CLUB SPEC ESC, the GT2.1 Prostock and GT2.1 EX to ROAR for the Sportsman Rule...hopefully these ESC's name will be up there soon.

Help
 

Howard..?? Anyone..??

Hope that you and yours are well.

I won a Speed Passion ESC at the Asphalt Assault Race.

I already had a Speed Passion 17.5 Motor (New In Box)
at home...

I tried to hook them up in my son's SC10 with a
Traxxas 2.4 Radio and Rcvr....

It programs "exactly" the way the Directions say,
seems fine, and I get steering but No Motor function.

I have tried different motors, and different receivers.

Any ideas?
:(

did u try changing the sensor wire

ESC
 

Thank you for your response.
Yes, I tried different sensor wires also...

Smell it, if it smells funky it did what mine did.

Please check PM...thanks

Here you go Howard this is my spec Speed Passion setup.
Car is a 07 Corally PHI
Speed Passion Cirtix ESC with Speed Passion V2 17.5 motor
Setting 1 is 9=100% ABS Braking
Setting 2 is 4=30% Drage Brake
Setting 3 Off Thermal
My final drive is a 4.4
Thanks Eric at Harbor Hobbies for the setup help.:nod:

I tried to upgrade from the 528 stock to the 508 and a note popped up saying I could not upgrade to that software. Any ideas? Will the SC have the same performance if I set 9 and 12 to setting 1 with the 528 as it would with the 508? I have the GT 2.0 LPF and previously loaded the 528 software using the same computer. Thanks