![]() |
thanks for the info.
|
Originally Posted by skypilot
(Post 7202964)
thanks for the info.
No problem I'm sure it's something that will be fixed in the final version. |
Originally Posted by kiloolli
(Post 7201831)
Hi,
I have tested weekend the beta software and had problems. First battery still everything was fine, second battery performance decreased after 1 minute, as if it would go without sensor cable. I have voted then new slider on the remote control but after some time, the problem was there again. What could be? |
Hey I just want to say thanks to Shawn Palmer for the opportunity to run for speedpassion. I already have my stuff on order so I hope to get it this week then off to the track on Saturday to test. I will post my findings by Monday.
|
Originally Posted by Marcos.J
(Post 7206856)
Hey I just want to say thanks to Shawn Palmer for the opportunity to run for speedpassion. I already have my stuff on order so I hope to get it this week then off to the track on Saturday to test. I will post my findings by Monday.
|
the speedpassion website has a download thats dated today, under the lcd programmer downloads,that has best all round settings starting guide for 17.5 13.5 10.5.......................
|
Originally Posted by 20 SMOKE
(Post 7207056)
YOU WILL STILL BE SLOW:lol:
|
Originally Posted by xrayal
(Post 7207267)
the speedpassion website has a download thats dated today, under the lcd programmer downloads,that has best all round settings starting guide for 17.5 13.5 10.5.......................
Am I reading it right, #13 always at 1? |
Originally Posted by Dave H
(Post 7207498)
Thanks for the heads up.:nod:
Am I reading it right, #13 always at 1? Don't ask me the theroy behind it...when 4000 rpm or lower not working, I can only go the other way, and some how, it is better...
Originally Posted by Marcos.J
(Post 7206856)
Hey I just want to say thanks to Shawn Palmer for the opportunity to run for speedpassion. I already have my stuff on order so I hope to get it this week then off to the track on Saturday to test. I will post my findings by Monday.
|
Originally Posted by Solara
(Post 7207615)
Absolutely not....infact, try 8000 rpm.
Don't ask me the theroy behind it...when 4000 rpm or lower not working, I can only go the other way, and some how, it is better... And welcome back.............which ride are you in now? |
What is the difference between the 205g_t and the 205g_a?
|
Where can i buy the speed passion V3 17.5?
Thanks |
Originally Posted by liteweight
(Post 7212892)
Where can i buy the speed passion V3 17.5?
Thanks |
Originally Posted by Boz
(Post 7212630)
What is the difference between the 205g_t and the 205g_a?
|
|
| All times are GMT -7. It is currently 02:57 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.