|
Originally Posted by 2-Bad
(Post 8523182)
Hi, I need help with a good setup for an M05 with Tamiya Sport Tuned motor on a low grip outdoor ashpalt track. The track isn't very technical. Its made up of 4 hairpins, and 1 high speed sweeper.
Locals say: Super Grips, 30wt oil all round, Springs Frt-Blue Rr-Yellow. But this just doesn't sound right so was hoping for reassurance or other solid options help!!!!! :confused: Shock oil Frt/Rr = Shock Springs Frt/Rr = Droop (Shock spacers Frt/Rr) = Tires Frt/Rr = Toe in/out = Anything else??? Thx.... :)
Originally Posted by Herkimer Jitney
(Post 7414848)
Guys, couldn't you have left this thread where it was instead of dredging it up again?
It's much easier to have all the Mini chat in the ONE thread - on the Tamiya Mini Cooper one please?....;) It's not like we're discussing anything different on this one... |
|
Sorry to resurrect an old thread, but I was trying to search this thread and couldnt find my answer. Will hardcase lipos fit the m05?
|
Not unless you find a "stick pack" type hard case Lipo.
|
Originally Posted by skadoosh
(Post 9157248)
Sorry to resurrect an old thread, but I was trying to search this thread and couldnt find my answer. Will hardcase lipos fit the m05?
|
Originally Posted by cannon
(Post 9157297)
Plenty of stick pack shape lipos available
Is there any mods I can do to make the hardcase packs fit? |
I am talking about hardcase stick packs. Rectangular shape packs mean severe cutting of the chassis ... not good
|
Originally Posted by cannon
(Post 9157363)
I am talking about hardcase stick packs. Rectangular shape packs mean severe cutting of the chassis ... not good
Oh well. I guess I will stick with my cup racer so I can use my lipos |
M05L/239mm
I tried searching for an answer, and didn't find what I was after...
I'm looking in an M05 manual, and can't seem to find how to stretch the chassis out to the 'L' length. (I'm assuming L = 239mm) I see only the S and M settings. If anyone can point me in the right direction, I'd appreciate it. |
Originally Posted by tsan
(Post 9282390)
I tried searching for an answer, and didn't find what I was after...
I'm looking in an M05 manual, and can't seem to find how to stretch the chassis out to the 'L' length. (I'm assuming L = 239mm) I see only the S and M settings. If anyone can point me in the right direction, I'd appreciate it. |
Thanks for the reply, Sydewynder.
I just printed off the manual, and it was much easier to find what I was after than when I was viewing it on screen. (my copy of the manual wasn't searchable) |
I'm looking for a good deal on a m05 pro that is TCS legal if anyone has one sitting on a shelf that they are looking to get a little cash for, PM me. Looking for something that overly hopped up, as will only race it a few times a year tops.
|
Originally Posted by jhhack
(Post 9285453)
I'm looking for a good deal on a m05 pro that is TCS legal if anyone has one sitting on a shelf that they are looking to get a little cash for, PM me. Looking for something that overly hopped up, as will only race it a few times a year tops.
|
Rear Toe Question
Two guys at my club have M05's and they both have + toe on one side and - toe on the other. The arms & hubs are not on the wrong sides or anything so I couldn't figure out what the issue was??? Thought someone here might know what is wrong. Thanks
|
hey guys, TT01 and M05 shocks are the same specs? Those 3racing ones (for the M05/03) are sold out everywhere i checked.
But the ones for TT01 are still available. Thanks! |
| All times are GMT -7. It is currently 05:42 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.