T.O.P. Racing "Photon" 1/10 EP Touring Car
#3181
Tech Regular
Stiltskin What springs and shock oil are you running at Debbies. Going to build the car this week any suggestions would be greatly appreciated Rick
#3182
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
#3183
Tech Master
#3184
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
#3185
thanks katze
#3186
i do have a couple of the tamale rear uprights i will sell
#3187
#3188
New Top Deck Medium 2.0mm
#3189
Hi
My car 1323 gr
I transferred the battery out to the side,there is not need so balance onto weights
My car 1323 gr
I transferred the battery out to the side,there is not need so balance onto weights
#3190
i dith see photo of a photon with a beld swap like x ray with lipo
to make room to move the electronics more in to the center
thats a nice idea also
to make room to move the electronics more in to the center
thats a nice idea also
#3191
Balanceing
Need help!! How do you balance the pro ton side to side? I know there is holes on front and rear shock towers but if you put a string through the holes it's not a striaght shot the gears are in the way. How do you balance?
#3192
i use 2 allen tip small enough to fit in the hole on the shock tower or if you want, use 2 pieces of string.
#3193
I tried using 2 allen wrenches that fit through the holes. When you pick up the car at both ends, it looks balenced but how can you tell within grams if it is balanced? How would you know if it's not tilting one way or the other? Would you put a level on the top? Thanks
#3194
I tried using 2 allen wrenches that fit through the holes. When you pick up the car at both ends, it looks balenced but how can you tell within grams if it is balanced? How would you know if it's not tilting one way or the other? Would you put a level on the top? Thanks
#3195
Use two pieces of string and not one... one at each end.