Tamiya TRF415
Tech Champion
iTrader: (32)
The car is ready for some more action in the morning. I'll update you guys sometime tomorrow night.
ok thank you for the set up
i tried it and it worked well
white front springs and 50WT oil
Blue rear springs and 35WT oil
25mm droop and 1.5 camber all round
front toe was 0 degrees
there was low grip due to rain in the morning ( i chickened out of that !!)
but it had dried by the second race and the car was planted and i feel i had the most grip i have EVER had with this car !!
big thank you to you all
i tried it and it worked well
white front springs and 50WT oil
Blue rear springs and 35WT oil
25mm droop and 1.5 camber all round
front toe was 0 degrees
there was low grip due to rain in the morning ( i chickened out of that !!)
but it had dried by the second race and the car was planted and i feel i had the most grip i have EVER had with this car !!
big thank you to you all
Great
ok thank you for the set up
i tried it and it worked well
white front springs and 50WT oil
Blue rear springs and 35WT oil
25mm droop and 1.5 camber all round
front toe was 0 degrees
there was low grip due to rain in the morning ( i chickened out of that !!)
but it had dried by the second race and the car was planted and i feel i had the most grip i have EVER had with this car !!
big thank you to you all
i tried it and it worked well
white front springs and 50WT oil
Blue rear springs and 35WT oil
25mm droop and 1.5 camber all round
front toe was 0 degrees
there was low grip due to rain in the morning ( i chickened out of that !!)
but it had dried by the second race and the car was planted and i feel i had the most grip i have EVER had with this car !!
big thank you to you all
Cheers Mark
Tech Champion
iTrader: (32)
Car was awesome yesterday. I made a bad mistake in the main and it cost me a chassis, rear hing pin, caster block, and some braggin' rights I have some ideas on what to do to make the car better then next time out so I can't wait until then. The Reedy warm up race is gonna be fun.
Car was awesome yesterday. I made a bad mistake in the main and it cost me a chassis, rear hing pin, caster block, and some braggin' rights I have some ideas on what to do to make the car better then next time out so I can't wait until then. The Reedy warm up race is gonna be fun.
piccys please
i want to have a 19 turn motor/waterproof speedo ready for a swap if bad weather comes in
but suspension is a mine field
heck
that would help with it swapping ends then go down one spring rate at a time on the front until you get a enough steering ( Im hoping you are using a spool) I would probably run sorex 22's leave the oils alone , leave your front toe as is and maybe raise your front ride height by 0.5 only if its a bit nosy.
Good luck
(ps Im trying 416WE arms and mounts soon ,will post my findings and if lap times were better or worse)
yes i am running a spool
i learned the one way is ...................erm.................... shall i say not good for a brushless set up LOL
i will be using the Vtec dunlop D20 wet tyres as i'm allowed to use 6 sets of tyre per year and with only 6 races i think i can manage with 5 Vtec 27's and the D20's
do you use roll bars on your dry car ??
i got them front and rear , althought they are just the stock ones
my lap times were 2 seconds a lap better than i have ever done , thanks to your set up
i learned the one way is ...................erm.................... shall i say not good for a brushless set up LOL
i will be using the Vtec dunlop D20 wet tyres as i'm allowed to use 6 sets of tyre per year and with only 6 races i think i can manage with 5 Vtec 27's and the D20's
do you use roll bars on your dry car ??
i got them front and rear , althought they are just the stock ones
my lap times were 2 seconds a lap better than i have ever done , thanks to your set up
Tech Elite
iTrader: (22)
Does the 415msxxx spool work on the TRF415? Also is there a way to make a front diff for the TRF415?
Thanks
Thanks
hi there i bought all the parts needed for the TRF415 spool and yes they all fit
i have a list of parts ere :-
http://www.vellrip.com/store/product...asp?p=337&c=78
http://www.vellrip.com/store/product...asp?p=742&c=78
http://www.vellrip.com/store/product...asp?p=744&c=78
then you need 3 screws and 2 pins (like the ones in the driveshaft UJ's) and your off
dont use a front diff i didnt like it and the conversion kit it expensave if you find a shop with any
i have a list of parts ere :-
http://www.vellrip.com/store/product...asp?p=337&c=78
http://www.vellrip.com/store/product...asp?p=742&c=78
http://www.vellrip.com/store/product...asp?p=744&c=78
then you need 3 screws and 2 pins (like the ones in the driveshaft UJ's) and your off
dont use a front diff i didnt like it and the conversion kit it expensave if you find a shop with any
Tech Champion
iTrader: (32)
Clint- The blue tang clan is gonna pull your card if you keep making the car look bad like that...
think it will be out of action for a couple of weeks LOL
it looks bad what happened ???
it looks bad what happened ???
Tech Champion
iTrader: (32)
My original crash only broke the front caster block but since the crash happened at the end of the straight and cars were still coming I got hit from the rear and that's were all the damage came from.
i broke a suspensoin arm and the upright at the weekend when a bloody marshal put a late car on the grid in front of me and "turned it on" but actually turned it off !!!!
i hit him full power didnt see him because the start marshal was stood in front of it !!!
got a blinding start from the back of the grid too !!!!
i hit him full power didnt see him because the start marshal was stood in front of it !!!
got a blinding start from the back of the grid too !!!!