Tamiya TRF415
Originally Posted by pug 205 gti
thanks fab is tir not that good then? ive been eyeing up some worlds edition driveshafts too.now whats your thoughts on those?thanks
feb/edd who paints your bodies any recommendations
feb ive ordered 1x 64p/111t spur gear and 27/28/29/30 pinions to start with.
thanks for all the help your giving me.
feb ive ordered 1x 64p/111t spur gear and 27/28/29/30 pinions to start with.
thanks for all the help your giving me.
Originally Posted by Ben.C
Your rear rims old or new?? Your rim maybe warped or out of shape that might be causing the wobble...
Originally Posted by TRF415boy
your wheel axles are bent. Make yourself a favour and buy the steel ones not the stupid lightweight ones...
Tech Champion
iTrader: (4)
Believe me, it's the wheel axles. I had that happen at the Cotswolds national last year, exactly the same thing your describing.
Just take the axles out, and replace them with steel of Ti ones. IMO, this is the biggest weak point on the MRE... they just aren't strong enough.
HiH
Ed
Just take the axles out, and replace them with steel of Ti ones. IMO, this is the biggest weak point on the MRE... they just aren't strong enough.
HiH
Ed
Tech Elite
iTrader: (3)
Originally Posted by TRFwhitey
yes the setup is for mod! i don't race stock
Originally Posted by pug 205 gti
feb/edd who paints your bodies any recommendations
feb ive ordered 1x 64p/111t spur gear and 27/28/29/30 pinions to start with.
thanks for all the help your giving me.
feb ive ordered 1x 64p/111t spur gear and 27/28/29/30 pinions to start with.
thanks for all the help your giving me.
have they got a web address
i have the oppotunity of either a second hand nosram dominator power or atsushi hara 2.1 any recommendations? thanks yet again
Tech Master
iTrader: (2)
Hara speedo because of the amount of adjustability and it looks cool . I've got the OLD Ko VFS 2000 speedo and it works great. Here is DragonPaints website.
Charles
Charles
are they suitable for lipo 3200?
Tech Master
iTrader: (2)
I think both are. I'd ask about the Hara speedo in the KO thread to just be sure.
Charles
Charles
Tech Fanatic
iTrader: (6)
does anybody know if the 415 spool drive cups will work in the MRE spool?
thanks
vic
thanks
vic
Originally Posted by hierog
does anybody know if the 415 spool drive cups will work in the MRE spool?
thanks
vic
thanks
vic
Originally Posted by TryHard
Believe me, it's the wheel axles. I had that happen at the Cotswolds national last year, exactly the same thing your describing.
Just take the axles out, and replace them with steel of Ti ones. IMO, this is the biggest weak point on the MRE... they just aren't strong enough.
HiH
Ed
Just take the axles out, and replace them with steel of Ti ones. IMO, this is the biggest weak point on the MRE... they just aren't strong enough.
HiH
Ed