ngo8

whats the differnce between the kan 1050 cells and the 1100 cells i know the kan cells are a little bigger but is there anything else?

Raydee

iTrader: (21)

There is a pretty noticible difference in performance. The Kans have way more punch.

spenzalii

iTrader: (2)

Grrr. just fried my Xray esc. I should send it back, but I need something stronger. I'm leaning toward either the spy or the IPD controller. Any ideas (I'm debating on dropping reverse, not too sure)

MikeR

iTrader: (15)

About the strongest is a LRP Quantum sport. Don't get reverse if you race, you need brakes more than you need reverse and the ESC will be much more reliable. If you just cruise around the street the Spy is pretty good. The reverse will be more convenient if you get stuck somewhere.

jc510

iTrader: (7)

I have a Keyence A-01. Works great's. It's a 3 wire. If you could find one, it should be around 85-95
lol

pucho

I like my IPD R18 it's nice and It fits well in the chassis.

ngo8

so i should get some kan cells then

jeepnyy

Iam using a GM V3r. Been good so far. The easiest speedo to setup. Turn on, full throttle, full brake...your done...go racing.

ngo8

i use the spy its good but i think i cooked the reverse

spenzalii

iTrader: (2)

Saw one in the LHS for $55. much cheaper than that quantum ($99). I just worry about the connectors. Can you replace the connectors on that VR3 (resolder them?) And does it have reverse? Not that I really need it, but with nitro season just around the corner, The chances of me racing it go down considerably.

ngo8

just got my ipd chassis its put together ill post some picts soon they are so sweet .

jeepnyy

SPENZALLI::::The GM V3r .....have reverse. They have another V3 without reverse. You can go to their website at :

http://www.gm-racing.de/

You can even download the instruction manual.

jeepnyy

Oh yeah ....yes you can easily replace the wires.....as long as you have a steady hand. Use mild soldering iron 10-20 watts...that way you don't fry the board. Don't use the ones that you use for your batteries. Just be careful.

rc-racer

iTrader: (1)

Here are a couple of pictures of my IPD Racing Xray.

Raydee

iTrader: (21)

Hey what are those batt connectors called? Who sells them? That IPD chassis looks real nice, I like it a lot!