Awesomatix EP Touring Car (A700 Shaft Drive)
#1621
Tech Fanatic
iTrader: (7)
They do sell them separate on the Awesomatix website, and seem to be in stock.
http://shop.awesomatix.com/index.php?productID=738
Ethan
http://shop.awesomatix.com/index.php?productID=738
Ethan
#1622
As a replacement I now have one of these (lightweight version), will see what it's like at the weekend;
http://www.eastcoastbt.com:8081/en/p...tails.php?p=33
#1623
Hi I have a brand new a700 for sale, if anyone is interested let me know thanks
#1625
My A700 is fully build and ready for action...
By the way, three questions:
- On my 4 dampers, only one have a small silver shim just under its "symetric screw", is that normal? Should I let this shim or remove it?
- How could I measure droop (= downstop) on this car (the setup says 26mm...)???
- Is it possible to buy only the four dampers?
Thank you very much...
By the way, three questions:
- On my 4 dampers, only one have a small silver shim just under its "symetric screw", is that normal? Should I let this shim or remove it?
- How could I measure droop (= downstop) on this car (the setup says 26mm...)???
- Is it possible to buy only the four dampers?
Thank you very much...
#1626
i tried the car for the 1st time last night was pretty happy with it.I had a couple of issues with the gear diff (chewing gears) which has been all sorted now.I ran kit setup which had good turn in but was pushing mid corner and exit.i softened the front damper and that helped allot has a good amount of steering i will try longer links next which im sure will improve the stability and steering.but overall happy with the car didnt have that much track time due to the gear diff problem.i am impressed in how good it reacts to changes.
#1628
Tech Regular
My A700 is fully build and ready for action...
By the way, three questions:
- On my 4 dampers, only one have a small silver shim just under its "symetric screw", is that normal? Should I let this shim or remove it?
- How could I measure droop (= downstop) on this car (the setup says 26mm...)???
- Is it possible to buy only the four dampers?
Thank you very much...
By the way, three questions:
- On my 4 dampers, only one have a small silver shim just under its "symetric screw", is that normal? Should I let this shim or remove it?
- How could I measure droop (= downstop) on this car (the setup says 26mm...)???
- Is it possible to buy only the four dampers?
Thank you very much...
Yes you can buy the dampers separately.
#1629
Tech Fanatic
You have possibility to shorten SB25x8 screws by 0.2-0.3mm with broach file and remove small silver shims after that.
#1631
Tech Initiate
hello;
i struggled today on a bumpy technical carpet track,
the back of the car was bouncing around, no way to find a good setup..
soft dampening as the one on freddy setup..nope..try Tom Maquel dampening nope..any help..thanks
just wanna know how u people choose your dampening cause i can see a lot of possibilities...when to go less or more A or B distance, confused with that..
thanks for ur help..
i struggled today on a bumpy technical carpet track,
the back of the car was bouncing around, no way to find a good setup..
soft dampening as the one on freddy setup..nope..try Tom Maquel dampening nope..any help..thanks
just wanna know how u people choose your dampening cause i can see a lot of possibilities...when to go less or more A or B distance, confused with that..
thanks for ur help..
#1632
.
Last edited by Magnet Top; 02-19-2012 at 04:42 PM.
#1633
hello;
i struggled today on a bumpy technical carpet track,
the back of the car was bouncing around, no way to find a good setup..
soft dampening as the one on freddy setup..nope..try Tom Maquel dampening nope..any help..thanks
just wanna know how u people choose your dampening cause i can see a lot of possibilities...when to go less or more A or B distance, confused with that..
thanks for ur help..
i struggled today on a bumpy technical carpet track,
the back of the car was bouncing around, no way to find a good setup..
soft dampening as the one on freddy setup..nope..try Tom Maquel dampening nope..any help..thanks
just wanna know how u people choose your dampening cause i can see a lot of possibilities...when to go less or more A or B distance, confused with that..
thanks for ur help..
look the attachment
#1634
Tech Champion
iTrader: (4)
Just a quick update from the TITC practise.
Myself and Tom have been working away pretty hard on modified settings, and both are now running the car the same... and feel very happy with it, good corner speed, and good reaction... no hint of traction roll yet either. I've got down to 16.1's, with Tom cracking 15.9's, with the fastest mod boys doing consistent 15.6's, so to be that close to the pace is very pleasing.
Tracks really really busy, so it makes it difficult to get a clean run in, which is certainly making it tricky for me to get in a groove, as I'm sure there are a few more tenths to come from improving my lines and so on. Car itself has proved to be very tough, given some of the unfortunate incidents leading to meeting's with the concrete wall.
Plan for tomorrow is to play with the rear link heights a little, then work on refining the damper and spring settings. Anyway, settings as of now attached.
Regards
Ed
Myself and Tom have been working away pretty hard on modified settings, and both are now running the car the same... and feel very happy with it, good corner speed, and good reaction... no hint of traction roll yet either. I've got down to 16.1's, with Tom cracking 15.9's, with the fastest mod boys doing consistent 15.6's, so to be that close to the pace is very pleasing.
Tracks really really busy, so it makes it difficult to get a clean run in, which is certainly making it tricky for me to get in a groove, as I'm sure there are a few more tenths to come from improving my lines and so on. Car itself has proved to be very tough, given some of the unfortunate incidents leading to meeting's with the concrete wall.
Plan for tomorrow is to play with the rear link heights a little, then work on refining the damper and spring settings. Anyway, settings as of now attached.
Regards
Ed
#1635
Hi, I brand new a700 for sale first 800 usd shipped to canada and lower 48 states,get its only today , lol, sale sale sale, pm me, more info. in the for sale section thanks