XRAY T2’009
#1831
Sorry, all I did was answer the mans question, he asked if the parts would work, and the answer was yes. But thanks for the details, I'm sure he appreciates it.
And FK, it's not your time or money to waste.
I actually had to look that acronym up.
But yes I do know some racers use the 008/009 arms on the 007 to achieve the middle shock mount location on the arm also. Just one more tuning option alot of racers don't think about.
And FK, it's not your time or money to waste.
I actually had to look that acronym up.
But yes I do know some racers use the 008/009 arms on the 007 to achieve the middle shock mount location on the arm also. Just one more tuning option alot of racers don't think about.
#1833
hi guys
my car has good balanced r-l but I've check the weight it's 1550gm where min allowed 1450gm so it's 100gm over weight ...
I don't use any tray and packs sits perfectly to the battery holes...
should I hang out the battery to remove those weight leads and balance the car? Which I know is not the ideal way to balance the car...
all added weight leads on battery side...
any advice welcome
thanx in advance
my car has good balanced r-l but I've check the weight it's 1550gm where min allowed 1450gm so it's 100gm over weight ...
I don't use any tray and packs sits perfectly to the battery holes...
should I hang out the battery to remove those weight leads and balance the car? Which I know is not the ideal way to balance the car...
all added weight leads on battery side...
any advice welcome
thanx in advance
#1835
hi guys
my car has good balanced r-l but I've check the weight it's 1550gm where min allowed 1450gm so it's 100gm over weight ...
I don't use any tray and packs sits perfectly to the battery holes...
should I hang out the battery to remove those weight leads and balance the car? Which I know is not the ideal way to balance the car...
all added weight leads on battery side...
any advice welcome
thanx in advance
my car has good balanced r-l but I've check the weight it's 1550gm where min allowed 1450gm so it's 100gm over weight ...
I don't use any tray and packs sits perfectly to the battery holes...
should I hang out the battery to remove those weight leads and balance the car? Which I know is not the ideal way to balance the car...
all added weight leads on battery side...
any advice welcome
thanx in advance
#1836
ok
Lrp cooler
Hacker-Orion motors,RS pro esc,Spectrum pro normal receiver,KO 2413 ICS servo,amb transponder...
on the other side IP5000 and IP3800 lipos with added weight leads both 234 grams and 30+30 grams of weight on chassis in front and rear of the lipo nothing else
That huge motor cooler makes the car harder to balance,It's own weight and extra weight on the lipo side to balance...
I think That's the trouble but I don't want to remove it to be honest...
Also Bodyshell another 100grams
Thanx for all helpfull posts
Lrp cooler
Hacker-Orion motors,RS pro esc,Spectrum pro normal receiver,KO 2413 ICS servo,amb transponder...
on the other side IP5000 and IP3800 lipos with added weight leads both 234 grams and 30+30 grams of weight on chassis in front and rear of the lipo nothing else
That huge motor cooler makes the car harder to balance,It's own weight and extra weight on the lipo side to balance...
I think That's the trouble but I don't want to remove it to be honest...
Also Bodyshell another 100grams
Thanx for all helpfull posts
#1838
The cooler will present a problem. From what I saw most guys are dumping the coolers and making fan holders out of lexan, just enough to blow air over the motor and not worry about pulling heat from the motor with the heat sink. The spectrum normal rxr is another item that if possible go to one of the smaller ones. Like you said, you now thats the biggest part of the balance problem right there (cooler) I'm sure you have heard all the other stuff about smaller this and that, and thats great if its in the budget, but if not you have to work with what you have and, again, the cooler is a biggy, I fought with the exact same issue till I talked to Drew Ellis and he showed me his fan holder, bare minimum, but it keeps the air moving over the motor which seems to help more than the heat sink. I'd start with that.
#1839
Yup
That cooler must be min 50 grams and another 50 added the other side of the car to balance comes to 100 grams which is My target to cut out
I shoud find out some pictures of that Lexan Fan holder stuff
Thanx guys
That cooler must be min 50 grams and another 50 added the other side of the car to balance comes to 100 grams which is My target to cut out
I shoud find out some pictures of that Lexan Fan holder stuff
Thanx guys
#1840
Xray lipo chassis balance weights #309860
Hi,
Any body knows which online rc shops sells the #309860 weights?
Have tried to order thru my local hobby shop but was told even xray do not have the stock?
Please advice..
Thks!
Ben
Any body knows which online rc shops sells the #309860 weights?
Have tried to order thru my local hobby shop but was told even xray do not have the stock?
Please advice..
Thks!
Ben
#1841
Fan
Or you can do what I did and just Shoegoo it behind the motor....works great
#1842
#1843
Can anyone with a perfectly balanced car with very low but legal weight post pics please?
#1844
#1845
I got a almost brand new 009 for sale. PM me if interested.